Your list is empty, add products to the list to send a request
Previous product
Back to products
RE-717M Ravel Addressable Manual Call Point
₹ 3,068.00 GST included
Next product
Testifire 1001-001 Smoke and Heat Detector Test Kit
₹ 218,300.00 GST included
Description
Model ALN-E(HFP) is a Photoelectric Smoke Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.
The ALN-E(HFP) incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Sensors in the majority of applications. This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.
The ALN-E(HFP) smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber while keeping out ambient light.
Features
- Removable, High Performance chamber
- Twin LEDs allow 360 viewing – green when polling, turn red in fire
- Locking mechanism (sensor to base)
- Variable sensitivity
- Electronically addressed
- Pulsing/non-pulsing controlled from panel*
- Approved by LPCB & VdS
- SIL Level 2 approved variants available
Specifications
- Ordering Code ALN-E(HFP
- Operating Voltage 17 – 41 V d.c.
- Low Power Mode (typ) 120 A
- Quiescent Current (typ) 400 A
- Alarm Current (controlled by CIE) 9.1 mA (excluding remote indicator
- Transmission Method Digital Communications Using ESP
- Operating Temperature Range -10 °C to + 50 °C
- Operating Humidity 95% RH - Non Condensing (at 40 °C)
- Storage Temperature Range -30 °C to +60 °C
- Storage Humidity <80% RH at 60 °C
- Colour / Case Material White / ABS
- Weight (g) 95
- Diameter (mm) / Height (mm) 100 / 45
- Compatible Bases YBN-R/3, YBO-R/SCI, YBO-BS, YBO-BSB, YBNR/3(SCI
- Base Fixing Centres (mm) 48 ~ 74
- Approvals LPCB & VdS
Related products
Close
Variex VFA-WSD Wireless Photoelectric Smoke Detector 9 Volt – Fire Alarm
Variex VFA-WSD Wireless Photoelectric Smoke Detector 9 Volt – Fire Alarm is an advanced fire safety device designed to detect
Close
Qutak QT 990SA Stand Alone Smoke Detector With Inbuilt Buzzer
Stand Alone Smoke Detector detects smoke produced by a fire and gives alarm signals in time. Using optical smoke sensing parts and art of state production technologies, it has a stable performance, esthetical appearance.
Close
Edward SIGA-OSD + SIGA-AB4G Addressable Smoke Detector with Sounder Base
Edward SIGA-OSD +
SIGA-AB4G Addressable Smoke Detector with Sounder Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Close
RE-316S 2L conventional Smoke Detector With Base-make Ravel
Optical Smoke Detector With Base-make Ravel An optical smoke alarm works using the light scatter principle. The alarm contains a pulsed infrared LED which pulses a beam of light into the sensor chamber every 10 seconds to check for smoke particles
Close
Freeze Fire Smoke Detector
Freeze Fire Smoke Detector fire alarm Heat Detectors are most suitable for environments where rapid fire development can be expected. when selecting the location on the ceiling for the heat detector, do not locate in direct path of hot or cold air flow. Refer to the detector specifications for the recommended maximum spacing. Earlier detector response may be obtained by reducing the spacing between detectors.
Close
Agni Smoke Detector
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Simplex (4098-9764) Multi-Sensor Detector
Simplex 4098-9764 Multi-Sensor 07431883 The Simplex 4098-9764 TrueAlarm multi-sensor 4098-9764 combines the established performances of a TrueAlarm photoelectric smoke sensor
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.