Your list is empty, add products to the list to send a request
Previous product
Back to products
Qutak QT - EL 3250 Emergency Exit Light 220V 50HZ
₹ 4,838.00 GST included
Next product
Prolite PEL LED M 600 Portable Non-Maintained Emergency Light
₹ 7,540.20 GST included
Qutak QT 180-2L Heat Detector Dual LED
See all products from qutak-security-devices₹ 2,360.00 GST included
Heat detectors are vital devices for detecting fires and ensuring safety. As the name suggests, the devices sense the temperature of a room or area in order to detect fires. Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.
In stock
Product Code : FSIN00000096
Brand: Qutak Security Devices
Seller: Fireshop1001
Approved by : [woo_pro_badges_extended]
quick processing
WARRANTY
For 365 days
always authentic
Only Reputed Brands
EASY PAYMENT
Multiple payment options
Description
The Heat Detector Dual LED is a addressable temperature detector rated at class A1, A2 and B (depending on the panel configuration settings). A rate-of-rise algorithm allows the device to raise the alarm before the fixed temperature trigger point is reached, whilst an exclusive 7-segment display provides on the spot information such as alarm notification for fault, pre-alarm, maintenance alarm (CleanMe), disable, test, error (double address, wrong sensor type) and sensor polling. Heat detectors are vital devices for detecting fires and ensuring safety. As the name suggests, the devices sense the temperature of a room or area in order to detect fires. Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.
Features
- Rate Of Rise cum Fix Temperature type
- Dual LED for 360 degree visibility
- 2 wire based detector
- Advance algorithms provides advanced detection discrimination
- Easy installation
- Low maintenance
- High immunity against unwanted alarms
- Stable heat chamber, No adjustment or replacement required
- Low operational voltage
- Designed for fast, easy installation
Specifications
- Operating Voltage : DC (10.8 ~ 30) V
- Frequency : 3-5 Seconds
- Heat Sensitivity : 135ø F/ROR
- Reset Voltage : Less than 1 volt
- Reset time : Less than 1 sec
- Alarm indication : 2 continuous emitting red LEDs
- Weight : 140 gram with base
- Start up current : 100æA
- Alarm current (Max) : 50 mA
- Stand by current : 45æA
- Dimension : Dia 100mm, ht 46mm
Related products
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Safe On Conventional Heat Detector
Safe On Conventional Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Mcp-yellow Ravel Make
Mcp-yellow Ravel MakeManual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Agni Hunt AHSD-650 Optical Smoke Detector White
Agni Hunt AHSD-650 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
Solo (200-001) Universal Detector Removal Tool (HSN 82055990)
Solo (200-001) Universal Detector Removal Tool With the ability to create various size combinations, the universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.