Your list is empty, add products to the list to send a request
Previous product
Back to products
Simplex 4099-9701 Addressable Manual Call Point
₹ 3,186.00 GST included
Next product
Simplex 4100-3103 Isolator Module for MAPNET
₹ 50,173.60 GST included
Simplex 4098-9714 photoelectric Smoke Detector
₹ 3,422.00 GST included
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Description
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Features
- Sealed against rear air flow entry
- Interchangeable mounting
- EMI/RFI shielded electronics
- Photoelectric technology sensing
- 360° smoke entry for optimum response
- Built-in insect screens
- Protocol IDNet, MAPNET II
- Voltage 24 VDC
- Voltage Range 18 – 32 VDC
Specifications
- Brand Simplex
- Unit of Measurement EA (Each)
- Type Detector
- Style Plug-In
- Detectable Medium Smoke
- Detection Method Photoelectric
- Programming Set via Base
Related products
Close
Apollo – XP95 I.S. Optical Smoke Detector – Model 55000-640APO
The Apollo XP95 I.S. Optical Smoke Detector (Model 55000-640APO) is an Intrinsically Safe (I.S.) addressable smoke detector designed for use in hazardous and explosive environments where flammable gases, vapours, or dusts may be present. Using advanced optical sensing technology, it provides early warning of smouldering fires by detecting visible smoke particles with high accuracy.
Close
Honeywell – Photoelectric Smoke / Thermal Multi-Criteria Fire Detectors – Model: HM-PTSE-AP + B5-1
Enhance your fire safety system with the Honeywell HM-PTSE-AP + B5-1 Multi-Criteria Fire Detector, a state-of-the-art solution combining both photoelectric smoke sensing and thermal detection in a single device. Designed to detect a wide range of fire types—including slow smoldering fires and fast-flaming fires—this intelligent detector delivers faster, more accurate fire identification while reducing the risk of false alarms.
Close
Fapt-851 Notifier Addressable Multi Detector
The FAPT-851AUS Acclimate™ detector uses a combination of photoelectric and thermal sensing technologies to increase immunity to false alarms. Unlike
Close
GST Stand Alone Smoke Detector, S-9102R (MOQ-2Pcs)
Self contained Optical Smoke Detector and Alarm Buzzer. Easy installation. Test/ Reset Button. Low Battery indication. Relay Output.
Close
Honeywell Farenhyt – Addressable Multi-Sensor (Optical Smoke + Heat) C/w Base – Model : IDP/PHOTO/T/W+B50 1/WHITE
Honeywell’s IDP-PHOTO-W Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design
Close
Dahua Addressable Smoke Detector (RI Support), DHI-HY-2301B (MOQ-2Pcs)
Polarity-free Two-wire Design simplifies on-site wiring. Employing intelligent background light compensation, it auto-adjusts alarm thresholds based on maze contamination, Prolonging cleaning cycles and Facilitating maintenance. Base Terminal features non-loosening screws for effortless Installation. Exhibiting High resistance to acids and rust, the contact material is Durable. Designed in accordance with EN54-7 Standard.
Close
Honeywell – Photoelectric Smoke Detector – Model: IDP-PHOTO-R-W
The Honeywell IDP-PHOTO-R-W is a highly accurate, addressable photoelectric smoke detector designed to provide early warning of smoldering fires in commercial and industrial environments. Featuring remote test capability, this white, low-profile detector integrates seamlessly with Honeywell’s fire alarm systems using the System Sensor protocol.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.