Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Compact Array Speaker, HX-5W
₹ 45,725.00 GST included
Next product
TOA Variable Arrays, HX-7B
₹ 121,953.00 GST included
TOA Compact Array Speaker, HX-5W-WP
₹ 63,602.00 GST included
Power handling: 600W Continuous Program at 8 ohms. One Module is Composed of 1 x 4.72 inch Cone-type LF driver and 3 x 1 Inch Balanced dome Tweeters. Adjustable Dispersion angle 15 Deg., 30 Deg., 45 Deg. and 60 Deg. Maximum Four Speaker Units can be Stacked. Splash-proof (IPX4 rated).
In stock
Description
TOA Compact Array Speaker, HX-5W-WP is a 2-way Compact Speaker System that permits both Constant Directivity control over a wide Frequency range and changes in Directivity. It is Ideal for Reproducing Clear Sound in spaces with long Reverberation times or High background Noises. In Locations where the Speaker is Directly Exposed to Rain, Periodical check is Required as the Deterioration of Speaker may Progress Depending on the Installation Environments.
Features
- Power handling: 600W Continuous Program at 8 ohms
- One Module is Composed of 1 x 4.72 inch Cone-type LF driver and 3 x 1 Inch Balanced dome Tweeters
- Adjustable Dispersion angle 15 Deg., 30 Deg., 45 Deg. and 60 Deg
- Maximum Four Speaker Units can be Stacked
- Splash-proof (IPX4 rated)
Specifications
- Brand : TOA
- Enclosure : Sealed type
- Power Consumption : Continuous pink noise: 200 W, Continuous program: 600 W
- Impedance : 8 ohm
- Sensitivity : 96 dB (60 Deg. mode), 97 dB (45 Deg. mode), 98 dB (30 Deg. mode), 99 dB (15 Deg. mode)
- Crossover Frequency : 4 kHz
- Directivity Angle : Horizontal: 100 Deg. (over 2,000 Hz), Vertical: 60 Deg. (over 800 Hz), 45 Deg. (over 1.2 kHz), 30 Deg. (over 1.6 kHz), 15 Deg. (over 3.2 kHz) variabe
- Speaker Component : Low frequency: 12 cm cone-type x 4, High frequency: Balanced dome-type x 12
- Finish Enclosure: Polypropylene, white Punched net: Surface-treated steel plate, white, rust proof coating
- Dimensions : 408 (W) x 546 (H) x 342 (D) mm
- Weight : 16 kg
- Included Accessories : Hanging bracket x 2, Hex. wrench x 1
Related products
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Ravel Hooter Alarm
Ravel Plastic Red MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Exide EP1212 Powersafe Plus Lead Acid Battery
Exide EP1212 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide CS 7-12 Gel Solar Battery
Exide CS 7-12 Gel Solar Battery manufactured by Exide used for various applications like UPS, CFL lights etc. It is a Lead Acid rechargeable battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
