Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Wide-Dispersion Ceiling Speaker, F-1522SC
₹ 5,015.00 GST included
Next product
TOA Compact Box Speaker, F-2000BT
₹ 20,709.00 GST included
TOA Compact Box Speaker, F-2000B
₹ 19,529.00 GST included
Compact Wide-dispersion speaker. Up to 180 W Continuous Program (F-2000B / F-2000W). Dispersion angle of 110 Deg. x 100 Deg. Easily mountable 80 Deg. x 80 Deg. Horn Adapter for increased Dispersion control included. 2-way Speaker with High quality 13cm Woofer and Balanced Dome Tweeter. Paintable. Covered rear-mounted terminal block (WP version).
In stock
Description
TOA Compact Box Speaker, F-2000B are Compact Two-way Speaker systems Designed for High efficiency, Wide Range, and High Power input Handling Capability. These Speaker Systems can be installed in a Manner ideal for the Location and Intended Application.
Features
- Compact Wide-dispersion speaker
- Up to 180 W Continuous Program
- Dispersion angle of 110 Deg. x 100 Deg
- Easily mountable 80 Deg. x 80 Deg. Horn Adapter for increased Dispersion control included.
- 2-way Speaker with High quality 13cm Woofer and Balanced Dome Tweeter
- Paintable
- Covered rear-mounted terminal block (WP version)
Specifications
- Brand : TOA
- Enclosure : Bass-reflex type
- Power Handling : Continuous pink noise: 60 W Continuous program: 180 W
- Rated Impedance : 8 ohm
- Sensitivity : 92 dB (1 W, 1 m) at installation in 1/2 free sound field, 93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter)
- Frequency Response : 65 Hz-20,000 Hz, (minus 10 dB), at installation in 1/2 free sound field)
- Directivity Angle : Horizontal: 110 Deg. Vertical: 100 Deg.
- Speaker Component : Low frequency: 20 cm (8) cone-type High frequency: 25 mm (1) dome tweeter
- Input Terminal : Push-in terminal
- Finish : Enclosure: HIPS, black, Punched net: Surface-treated steel plate, black, paint, Joint bracket, wall bracket: Steel plate t2.0, black paint, Speaker bracket: Die-cast aluminum, black, paint
- Dimensions : 244 (W) x 373 (H) x 235 (D) mm (9.61 x 14.69 inch x 9.25 inch)
- Weight : 6.5 kg (14.33 lb) (including the supplied brackets)
Related products
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Vision CP1232 Sealed Lead Acid Batteries
Vision CP1232 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Ravel Hooter Alarm
Ravel Plastic Red MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Vision CP1212 Sealed Lead Acid Batteries
Vision CP1212 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
