Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Battery charger, IR-200BC CE
₹ 38,232.00 GST included
Next product
TOA Infrared Wireless Microphone, IR-300M Y
₹ 21,830.00 GST included
TOA Infrared Wireless Microphone, IR-200M Y
₹ 21,830.00 GST included
Stable Voice Transmission. Intelligent Positioning of the Emitter avoids Dropouts through user‘s Handling. Electret Condenser Microphone Unit. Light Weight. Infrared Light emission intensity Adjustable. Two Selectable Channels. Antibacterial treatment. Low-battery Indicator.
In stock
Description
TOA Infrared Wireless Microphone, IR-200M Y is a Handheld Infrared Wireless Microphone. It Eliminates problems with Interference or Eavesdropping, allowing simultaneous use in Adjacent Conference rooms or School Classrooms. Since infrared Wireless Microphone System uses a frequency band that does not Interfere with that of the TS-820 and TS-920 series Infrared Conference System, both systems can be Simultaneously installed in the same location. Possible to use with either Channel A / B / 1 / 2 within the IR-800 Voicelift System.
Features
- Stable Voice Transmission
- Intelligent Positioning of the Emitter avoids Dropouts through user‘s Handling
- Electret Condenser Microphone Unit
- Light Weight
- Infrared Light emission intensity Adjustable
- Two Selectable Channels
- Antibacterial treatment
- Low-battery Indicator
Specifications
- Brand : TOA
- Battery : Rechargeable Battery for the infrared wireless microphone (option) or AA alkaline dry cell battery (2 pieces)
- Current Consumption : Typ. 250 mA (2.4 V, Power selector switch: N) Typ. 340 mA (2.4 V, Power selector switch: H)
- Wavelength : 870 nm (AM: Brightness modulation)
- Modulation Method : Frequency modulation
- Tone Signal : 32.768 kHz
- Maximum Input Sound Pressure Level : 120 dB SPL
- Microphone Element : Unidirectional electret condenser microphone
- Frequency Response : 100 Hz - 12 kHz
- Finish : Control section: ABS resin, metallic gray, paint, 50 percent gloss. Filter section: Polycarbonate, optical cut filter
- Dimensions Ø37 x 241.8 (H) mm (Ø1.46 inch x 9.52 inch)
- Weight : 170 g (0.37 lb) (with battery)
Related products
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel Plastic Green MCP Hooter Alarm
Ravel Plastic Green MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide EP26-12 Powersafe Plus Lead Acid Battery
Exide EP26-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Vision CP832 S Sealed Lead Acid Batteries
Vision CP832 S Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
