Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA LC-100-AS Line Converter for PA Network Control & System Integration
₹ 17,700.00 GST included
Next product
TOA M-633D Digital Stereo Mixer for PA & Voice Alarm Amplification Systems
₹ 329,220.00 GST included
TOA LS-3010-AS Line Supervisory for PA Network Control & System Integration
₹ 146,320.00 GST included
10 Channels Input from Amplifier, 10 Channels Output to Speaker line. 10 Channels Attenuator Bypass control and 1 Fault Control. Speaker line fault detection in individual zone. Normal (Green), Open (Orange), Short (Red) LED indicators. 1 W to 500W (20 ohm to 10 kohm Measurement range). Ability to Schedule monitoring of speaker line at 1min, 1hour, 12hours and 24hours. Lamp Test with Buzzer. Short Circuit speaker line Isolation. Ability to Detect speaker line Branching with impedance measuring function.
In stock
Description
TOA Line Supervisory, LS-3010-AS is a Highly Reliable and Efficient 10 Channels line Supervisory for Measuring or Monitoring the Impedance of each Speaker Line. The Status of each Speaker line in Normal, open or Short Condition is Easily identified by the LED Indicators.
Features
- 10 Channels Input from Amplifier, 10 Channels Output to Speaker line
- 10 Channels Attenuator Bypass control and 1 Fault Control
- Speaker line fault detection in individual zone
- Normal (Green), Open (Orange), Short (Red) LED indicators
- 1 W to 500W (20 ohm to 10 kohm Measurement range)
- Ability to Schedule monitoring of speaker line at 1min, 1hour, 12hours and 24hours
- Lamp Test with Buzzer
- Short Circuit speaker line Isolation
- Ability to Detect speaker line Branching with impedance measuring function
Specifications
- Brand : TOA
- Power Source : 24 V DC, 45 mA
- Measurement Frequency : 50 Hz, 1 kHz
- Measurement Range : 20 ohm - 10 kohm (1 W - 500 W)
- Input : 10 channels: 100 V from amplifier output
- Output : 10 channels: to speaker lines, max. load 500 W each channel
- Finish, Front Panel : Aluminum Hairline, Alumite Black Case: Steel Plate, Painting Black
- Dimensions : 482 (W) × 44 (H) × 320 (D) mm
- Weight : 3.3kg
- Included Accessories : 6P Connectors x12, 2P Connector x1
Related products
Close
Agni Hunt 22 Zone Fire Alarm Panel
Agni 22 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide CS 7-12 Gel Solar Battery
Exide CS 7-12 Gel Solar Battery manufactured by Exide used for various applications like UPS, CFL lights etc. It is a Lead Acid rechargeable battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP645 Sealed Lead Acid Batteries
Vision CP645 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Exide EP1212 Powersafe Plus Lead Acid Battery
Exide EP1212 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
