Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Expansion Set, NF-CS1
₹ 8,437.00 GST included
Next product
TOA Network Audio Adapter, NX-100S
₹ 71,390.00 GST included
TOA Network Audio Adapter, NX-100
₹ 96,052.00 GST included
Audio Network Adapter for Transmitting Audio and Control Signals via LAN. Unicast: up to 4 Locations, Multicast: up to 64 Locations. Low Cost Operation. Operation on both AC and DC.
In stock
Description
TOA Network Audio Adapter, NX-100 can Transmit High-Quality Audio Signals and such control Data as serial data over IP networks, such as LAN or Internet, in real time.It is especially useful when transmitting audio signals to remote locations, as Internet use keeps running costs lower than the use of dedicated lines. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard rack (1 unit size).
Features
- Audio Network Adapter for Transmitting Audio and Control Signals via LAN
- Unicast: up to 4 Locations, Multicast: up to 64 Locations
- Low Cost Operation
- Operation on both AC and DC
Specifications
- Brand : TOA
- Power Source : 24 V DC (removable terminal block (3 pins) or AC adapter AD-246 (optional) or the equivalent
- Current Consumption : 200 mA (DC operation)
- Frequency Response : 50 - 14,000 Hz (when sampling frequency is 32 kHz)
- Distortion : Under 0.3 percent (1 kHz, when sampling frequency is 32 kHz)
- Network I/F : 10BASE-T/100BASE-TX, Auto-Negotiation
- Serial I/F : RS-232C (DCE I/F), D-sub connector (9P, male), 9600bps - 115200bps
- Network Protocol : TCP, UDP, ARP, ICMP, HTTP, RTP, IGMP
- Finish : Steel plate, black, 30% gloss
- Dimensions : 210 (W) x 44.7 (H) x 188 (D) mm
- Weight : 1.2 kg
- Optional Accessories Rack mounting bracket : MB-15B-BK (for rack mounting one NX-100 unit), MB-15B-J (for rack mounting two NX-100 units), AC adapter: AD-246
Related products
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Vision CP645 Sealed Lead Acid Batteries
Vision CP645 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Vision CP612 Sealed Lead Acid Batteries
Vision CP612 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP26-12 Powersafe Plus Lead Acid Battery
Exide EP26-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Exide EP1212 Powersafe Plus Lead Acid Battery
Exide EP1212 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
