Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA PD-1535S-AS Power Sequencer for PA Network Control & System Integration
₹ 71,980.00 GST included
Next product
TOA PE-304BU Pendant Speaker for Public Address & Voice Evacuation Systems
₹ 50,740.00 GST included
TOA PE-304 Pendant Speaker for Public Address & Voice Evacuation Systems
₹ 20,060.00 GST included
Ideally suited for BGM and Announcements. Stylish and outstanding design inspired by the finest lighting fixtures. Excellent Sound Quality. Sturdy Cable extendable up to 5 meters. Paintable. Input Impedance easily Changeable. Bass-reflex Type.
In stock
Description
TOA Pendant Speaker, PE-304 is a Pendant Speaker Designed for Ceiling Suspension Installations. Considered in architectural design, it can blend in with lighting equipment. A directly-attached 5 m (16.4 ft) cable allows the speaker to be suspended from the high ceiling. The PE-304 is driven on both high-impedance (100 V and 70 V) and low-impedance (8 ohm) lines. The input power (impedance) can be easily changed at the upper side of the speaker. The speaker is easy to repaint so as to meet a wide range of design needs.
Features
- Ideally suited for BGM and Announcements
- Stylish and outstanding design inspired by the finest lighting fixtures
- Excellent Sound Quality
- Sturdy Cable extendable up to 5 meters
- Paintable
- Input Impedance easily Changeable
- Bass-reflex Type
Specifications
- Brand : TOA
- Enclosure : Bass-reflex type
- Rated Input : 30 W (100 V, 70 V line, 8 ohm)
- Sensitivity : 91 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
- Frequency Response : 70 - 20,000 Hz (peak -20 dB)
- Speaker Component : 12 cm (5 inch) cone-type plus balanced Dome-tweeter
- Speaker Cable : 2-core cabtyre cord 5 m (16.4 ft)
- Connection : Push-in connector (bridging terminal-2 branch type)
- Finish - Enclosure: HIPS resin, off-white (RAL 9010 or equivalent color) Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color), paint
- Dimensions : Ø186 x 251 (H) mm (Ø7.32 inch x 9.88 inch) (unit only)
- Weight : 2.1 kg (4.63 lb) (unit only)
- Included Accessories : Ceiling bracket x 1, Mounting hanger x 1, Ceiling cover x 1, Speaker mounting screw (4 x 16) x 4
Related products
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Agni Hunt 22 Zone Fire Alarm Panel
Agni 22 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Vision CP632 Sealed Lead Acid Batteries
Vision CP632 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
