Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA SP-410 Wall/ Ceiling Mounting Bracket for PA System Installation & Mounting
₹ 8,378.00 GST included
Next product
TOA SR-C15B High Performance Subwoofer for Public Address & Voice Evacuation Systems
₹ 503,860.00 GST included
TOA SP-420 Speaker Mounting Bracket for PA System Installation & Mounting
₹ 7,552.00 GST included
Designed to exclusively mount the BS-1030W in a Wall or Ceiling. Can be Easily mounted to the Surface made of the Plaster Board or Plywood. Finish: Base bracket: Surface treated steel plate, white paint / Shaft and Mounting clip: Nickel plated rolled steel plate.
In stock
Description
TOA Speaker Mounting Bracket, SP-420 is a Bracket Designed to Exclusively mount the BS-1030W Universal Speaker in a Wall or Ceiling. The bracket can be easily mounted to the surface made of the plaster board or plywood. Make a 175 x 260 mm hole (tolerance: ±3 mm) in the wall or ceiling before mounting.
Features
- Designed to exclusively mount the BS-1030W in a Wall or Ceiling
- Can be Easily mounted to the Surface made of the Plaster Board or Plywood
- Finish: Base bracket: Surface treated steel plate, white paint / Shaft and Mounting clip: Nickel plated rolled steel plate.
Specifications
- Brand : TOA
- Board Thickness Requirement : 5 - 24 mm
- Finish - Base bracket: Surface treated steel plate, 2.0 mm in thickness, white, paint, Shaft: Nickel-plated rolled steel plate, 0.5 mm in thickness, Mounting clip: Nickel-plated rolled steel plate, 2.0 mm in thickness
- Included Accessories : Mounting clip screw……2, Plain washer for mounting clip……2, Speaker fixing screw……2, Speaker fixing plain washer……2, Base frame fixing butterfly bolt……6 (installed in the base frame)
Related products
Close
Exide EP65-12 Powersafe Plus Lead Acid Battery
Exide EP65-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Vision CP6100 Sealed Lead Acid Batteries
Vision CP6100 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
