Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA HX-7W Variable Arrays for Public Address & Voice Evacuation Systems
₹ 333,940.00 GST included
Next product
TOA HY-1200HB Wall/ Ceiling Mounting Bracket for PA System Installation & Mounting
₹ 12,980.00 GST included
TOA HX-7W-WP Variable Arrays for Public Address & Voice Evacuation Systems
₹ 378,780.00 GST included
High Power Handling. Speaker Design consists of Four Integrated modules that can be adjusted individually to Optimize the Vertical Dispersion Angle. Built-in Isophasic Wavefront control Horn with Compression Driver ensures precise HF control and Superior Reproduction of HF Sounds. 0 Deg. Mode Facilitates the most Effective line Array Set-up. Easily Adjustable Vertical Dispersion Angle.
In stock
Description
TOA Variable Arrays, HX-7W-WP is a 2-way Compact Speaker System that permits both Constant Directivity control over a wide Frequency range and changes in Directivity. Its Adopted Wave front Control Technology is Ideal for Reproducing clear sound in spaces with long Reverberation times or high Background Noise. The speaker is designed to be installed under the eaves when used outdoors.
Features
- High Power Handling
- Speaker Design consists of Four Integrated modules that can be adjusted individually to Optimize the Vertical Dispersion Angle
- Built-in Isophasic Wavefront control Horn with Compression Driver ensures precise HF control and Superior Reproduction of HF Sounds
- 0 Deg. Mode Facilitates the most Effective line Array Set-up
- Easily Adjustable Vertical Dispersion Angle
Specifications
- Brand : TOA
- Enclosure : Sealed type
- Power Handling : Continuous pink noise: 250 W, Continuous program: 750 W
- Rated Impedance : 8 ohm
- Sensitivity : 100 dB (1 W, 1 m）
- Frequency Response : 105 - 20 Hz
- Directivity Angle : Horizontal: 100 Vertical : Depending on directivity angle mode
- Speaker Component : Low frequency: 13 cm cone-type x 8, High frequency: Wave front control horn with compression driver x 4
- Finish Enclosure: Polypropylene, white, Punched net: Surface-treated steel plate, white, rust proof coating
- Dimensions : 497 (W) x 664 (H) x 274 (D) mm (19.57 inch x 26.14 inch x 10.79 inch)
- Weight 30 kg (66.14 lb)
Related products
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Vision CP612 Sealed Lead Acid Batteries
Vision CP612 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP150-12 Powersafe Plus Lead Acid Battery
Exide EP150-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide CS 7-12 Gel Solar Battery
Exide CS 7-12 Gel Solar Battery manufactured by Exide used for various applications like UPS, CFL lights etc. It is a Lead Acid rechargeable battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Vision CP832 S Sealed Lead Acid Batteries
Vision CP832 S Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
