Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Wall Mount Speaker Black with Attenuator, BS-678BT
₹ 4,248.00 GST included
Next product
TOA Wall Mount Speaker, BS-680F
₹ 6,962.00 GST included
TOA Wall Mount Speaker with Attenuator, BS-678T
₹ 4,248.00 GST included
Ideally Suited for BGM and Announcements. Compact and Unobtrusive Design. Quick and easy Installation, which saves time on setting-up. Horizontal / Vertical Direct Wall Installation. A push-in Terminal allows easy Cable Connections and Bridge Wiring. Equipped with an attenuator.
In stock
Description
TOA Wall Mount Speaker with Attenuator, BS-678T have a Built-in Attenuator and can be Connected to a 2-wire or 3-Wire system. The Push-in type input Connector makes Cable Connections Easy and allows Bridge Wiring position of the Transformer. Two built-in 6-inch Double cone Speaker units Deliver High Quality Sound, if an Outward Force is applied to. The input Impedance can be easily Changed by changing the Tap Structure that permits direct wall-mounting with Screws prevents the Speaker from falling easily even. Either Concealed in-wall Wiring or exposed wiring can be used for Speaker Cable Connection. The BS-678T, of which Cabinet is made of Wood, can be Installed in a Vertical or Horizontal Orientation.
Features
- Ideally Suited for BGM and Announcements
- Compact and Unobtrusive Design
- Quick and easy Installation, which saves time on setting-up
- Horizontal / Vertical Direct Wall Installation
- A push-in Terminal allows easy Cable Connections and Bridge Wiring
- Equipped with an Attenuator
Specifications
- Brand : TOA
- Rated Input : 6 W (100 V line), 3 W (70 V line)
- Rated Impedance : 100 V line: 1.7 kohm (6 W), 3.3 kohm (3 W), 6.7 kohm (1.5 W), 13 kohm (0.8 W), 70 V line: 1.7 kohm (3 W), 3.3 kohm (1.5 W), 6.7 kohm (0.8 W), 13 kohm (0.4 W)
- Sensitivity : 94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)
- Frequency Response : 150 Hz - 20 kHz (peak -20 dB)
- Speaker Component : 16 cm (6) double cone-type
- Cable Requirements : 600 V vinyl-insulated cable (IV wire or HIV wire), Solid wire: Φ0.8 - Φ1.6 mm (equivalent to AWG 20 - 14), 7-core twisted wire: 0.75 - 1.25 mm2 (equivalent to AWG 18 - 16)
- Finish : Baffle: HIPS, off-white (RAL 9010 or equivalent color) Cabinet: Particle board with pvc sheet, off-white (RAL 9010 or equivalent color) Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color)
- Dimensions 250 (W) x 190 (H) x 110 (D) mm (9.84 x 7.48inch x 4.33inch)
- Weight 1.7 kg (3.75 lb)
- Included Accessories Speaker mounting screw (4 x 35 (0.16 x 1.38inch) …2inch
Related products
Close
Vision CP645 Sealed Lead Acid Batteries
Vision CP645 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP1212 Sealed Lead Acid Batteries
Vision CP1212 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Vision CP832 S Sealed Lead Acid Batteries
Vision CP832 S Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
