Your list is empty, add products to the list to send a request
Close
Ravel RE-9016 Conventional Fire Alarm Panel System 16 Zones
Complies with UL -864 and NFPA-72. 20 x 4 Dot Matrix LCD Display. Operates on 120 220v 60 /50 Hz, AC Mains power supply. Standby (battery) backup 24v DC power supply with builtin charger. Touch Keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Class B Notification Appliance Circuits (NAC). NAC shall be programmed as auto silence / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24V D.C. Output. S 485 Communication facility. TCP/IP facility (Optional) MODBUS for BMS integration (Optional). PC software (optional) External Zone Wise Sounder/Contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Facility to connect Public Address System (PA) through RS-485 Communication. Peer to Peer network facility. Maximum 16 panels can be connect in a Single Network. Electrical Specification
Close
Agni Hunt 4 Zone Fire Alarm Panel- HSN Code 85311020
Agni 4 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides reliable and cost-effective solutions to fire detection, for small installations which are 4 zones.
Close
Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel
Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Close
Agni Hunt 2 Zone Fire Alarm Panel
Agni 2 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost-effective solution to fire detection, for small installations which are 2 zone.
Close
Simplex 4100-3109 IDNet2 250 points 2 Loop Interface Module
Simplex 4100-3109 IDNet2 250pt 2 Loop Interface Module electrically isolated output with two short circuits isolating Class B or Class
Close
Honeywell Farenhyt – Repeater Panel Model: RA-2000
RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs). They connect
Close
Honeywell Farenhyt- IFP-2100 Fire Alarm Control Panel – 4 Loop
Honeywell’s Farenhyt series Analog Addressable Fire Alarm Control Panels are the controlling unit of a fire alarm system with an
Close
ExoFire Fire Alarm Panel – 2 Zone
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Close
AGNEESTORM 2-Zone Fire Alarm Control Panel
World Class Quality Control Systems. Easy Operation to Enable/Disable Zones, Sounder outputs and Alarm output. Capable of Detecting and Alerting to Potential Fire Hazards. Advanced Features for Quick and Efficient Response. Robust Construction. Reliable Performance.
Close
Ravel RE-2558 Conventional Fire Alarm Panel System 8 Zones
Switched Mode Power Supply. Modular Construction Auto Resettable Fuse Surge Protection for all Input and outputs. Programmable AC loss delay/Trouble Remainder/Alarm Verification Battery polarity reversible protection Surface Mount Technology Over All current consumption is low. Fully complies with UL -864 and NFPA-72. Rugged CRCA sheet with powder coated finish Operates on 110 220v 50 /60 Hz, AC Mains power supply. 16×2 Dot Matrix LCD Display. 4/8 Class B Style B or Style C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Any Zone can be configured as Alarm or supervisory Zone. 2ClassBNotificationApplianceCircuits(NAC). NAC shall be programmed as silenceable or Non Silenceable. Supervisory Zone shall be Latching or Resettable. Standby (battery) backup 24v DC power supply with built in charger Error free Fire / Fault status in unambiguous colored LED indication. System ON indication. Main, Standby status audible and visual indication. Battery Low visual warning with audible tone. FormC relays for fire, fault and supervisory. Resettable / Steady 24V D.C. Output. RS 485 Communication facility (Optional). Lamp Test facility. All field wiring circuits are Power limited except 110 220v AC and Battery. All field wiring circuits are supervised. Walk Test facility. Zone Isolation facility with loop voltage cut off. Earth fault annunciation facility at 0 ohms. AC Low voltage cutoff. Programmable AC loss delay / Alarm verification / Trouble reminder.
Close
Ravel 4 Zone Fire Alarm Panel
Ravel 4 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Ravel 2 Zone Fire Alarm Panel
Ravel 2 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Close
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Close
Latitude produced by Hochiki – System B Panel Module Model no : S770
The Hochiki Latitude System B Panel Module (S770) is an essential system module for the Latitude Fire Alarm Control Panel,
Close
Dahua Addressable Repeater Panel, DHI-HY-1330
Convenient wiring: Two-wire, Polarity-free. Reliable communication: Built-in Microprocessor, performance is stable. Ultra-Low Power Consumption: Ultra-low Monitoring Current and Alarm Current. Designed in accordance with EN54-2 Standard.
Close
Dahua Addressable Control Panel, 2 Loop DHI-HY-1025R
Class A Topology : Reduce wiring costs and enhance circuit stability. Two-Wire, Polarity-Free Communication. User-Friendly Display. Extended Event Logging. Intelligent Power Management. Automatic switching between Main and Backup power. Comprehensive Protection.
Close
Dahua Addressable Fire Alarm Control Panel, 1 Loop – DHI-HY-1022R
Class A Topology : Reduce wiring costs and enhance circuit stability. Two-Wire, Polarity-Free Communication. User-Friendly Display. Extended Event Logging. Intelligent Power Management. Automatic switching between Main and Backup power. Comprehensive Protection.
Close
Dahua 8 Zone Conventional Fire Alarm Control Panel DHI-HY-C102-8-RED
90VAC to 270VAC Main Power Supply ensures the stable operation. 4 Dry contacts make connection flexible. Ethernet Interfaces enables communication with IoT platform. RS-485 interface contributes to convenient integration. Record and Export capacity of historical events for each of fire, fault and operation. Designed in accordance with EN54-2 and EN54-4 standards.
Close
Dahua 6 Zone Conventional Fire Alarm Control Panel DHI-HY-C102-6-RED
100VAC to 240VAC Main Power Supply ensures the stable operation. 4 Dry contacts make connection flexible. Ethernet Interfaces enables communication with IoT platform. RS-485 interface contributes to convenient integration. Record and Export capacity of historical events for each of fire, fault and operation. Designed in accordance with EN54-2 and EN54-4 standards.
Close
Dahua 4 Zone Conventional Fire Alarm Control Panel DHI-HY-C102-4-RED
90VAC to 270VAC Main Power Supply ensures the stable operation. 4 Dry contacts make connection flexible. Ethernet Interfaces enables communication with IoT platform. RS-485 interface contributes to convenient integration. Record and Export capacity of historical events for each of fire, fault and operation.
