Your list is empty, add products to the list to send a request
Close
ASES Two Zone microprocessor based Conventional Fire Alarm Panel, Model No. IR2Z
Standalone system. With a 16x2 LCD character. 2 zones detection circuit. Fire & Fault potential-free contacts. Common Hooter. And battery Fault Indication. Inbuilt Battery Charger.
Close
Simplex 4100ES Addressable Fire Alarm Control Panel – 2 Loop
Simplex 4100ES Addressable Fire Alarm Control Panel is designed to provide advanced fire detection, alarm, and control capabilities for various
Close
Ultra Fire Panel 8 – Zone
Switched Mode Power Supply (95-245)V Modular Construction Auto Resettable Fuse Surge Protection Programmable AC loss delay/Trouble Remainder/Alarm Verification Battery polarity reversible protection Surface Mount Technology Over All current consumption is low. Fully complies with UL -864 and NFPA-72. Rugged CRCA sheet with powder coated finish. Operates on 110 - 220v 50 /60 Hz, AC Mains power supply. 16x2 Dot Matrix LCD Display. 4/8 Class B Style ?B ? or Style ?C? initiating device circuit (IDC).
Close
Ultra Fire Panel 6 – Zone
2 x 16 character backlit LCD display. (4 x 20 character, optional) 64 / 128 / 256 Events logging facility with real time clock and keypad. (optional) 2 Wire Communication facility via RS 485 Port. (For Repeater Panel) (optional) BMS attachment Lamp test features. Complete with integral power supply and battery charger for SMF battery. NO/NC contacts for both fire and fault. Switches to enable on board operation. LCD and LED Indication for open, short circuit, Isolate, Fire in each zone.
Close
Ultra Fire Panel 4 – Zone
Conventional 4 Zone Fire Panel And Detection System, 50hz
Close
Ultra Fire Panel 2 – Zone
Switch Mode Power Supply. Modular Construction, Serviceable. Surface Mount Technology. Battery polarity & deep discharge protection. As per IS -15908: 2011 Standard. 16 X 2 Dot Matrix LCD Display. Standby battery backup with built in charging. Fire / Fault status in unambiguous colored LED indication. Switch Mode Power Supply. Tactile Keypad for easy panel operation. System on indication. Main, Standby status indication. Low Battery visual warning with audible tone. Relay output for actuators for Fire and Fault. Lamp Test facility Zone wise one man walk Test Facility. Zone wise Isolation facility with loop voltage cut off. Compatible to all type of Conventional Detectors. Optional Zone Wise Sounder / Zone Wise Contact.
Close
Ravel RE-9064 Conventional Fire Alarm Panel System 64 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network. 20 X 4 Dot Matrix LCD display. Alphanumeric keypads. RS 485 Communication for Network Repeater. System ON, AC ON, Battery ON, Charger ON indications. Lamp test facility. Maximum 16 panels including repeater can be connected in a Single Network.
Close
Ravel RE-9048 Conventional Fire Alarm Panel System 48 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network. 20 X 4 Dot Matrix LCD display. Alphanumeric keypads. RS 485 Communication for Network Repeater. System ON, AC ON, Battery ON, Charger ON indications. Lamp test facility. Maximum 16 panels including repeater can be connected in a Single Network.
Close
Ravel RE-9032 Conventional Fire Alarm Panel System 32 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network. 20 X 4 Dot Matrix LCD display. Alphanumeric keypads. RS 485 Communication for Network Repeater. System ON, AC ON, Battery ON, Charger ON indications. Lamp test facility. Maximum 16 panels including repeater can be connected in a Single Network via RS-485. Repeater Panel can monitor the status of RE-900 series panels via RS-485 Network communication. User can Disable / Enable the Zone of Fire Alarm Control Panel Connected in network. Ravel Indian Manufacturer, International standard. Operates on RS-485 communication. Repeats all the parameters of the main FACP.
Close
Ravel RE-9024 Conventional Fire Alarm Panel System 24 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network.
Close
Ravel RE-9020 Conventional Fire Alarm Panel System 20 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single
Close
Ravel RE-9012 Conventional Fire Alarm Panel System 12 Zones
The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
Close
GSTDC-M9503 Loop Isolator Module
Isolation of short circuit, automatic restore when short circuit is cleared. Support Class A SLC loop Standard: UL864 NFPA [70.72]
Close
GST200N-2 Addressable Intelligent Fire Alarm Control Panel 2 Loop
Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed Sounder strobe output provides 0.5A/24V load, compatible with GST conventional sounders Max. 30 zones. Each zone has its own alarm and fault/disable indicator and a label Compatible with GST intelligent and digital products RS232 interface enables communication with PC Optioanl expaned to 2 loops, 477 loop devices RS485 or CAN interface enables networking 15 LEDs to display important information Capacity 236 addressable devices 8X18 characters LCD screen
Close
8 Zone Panel-ravel Make
8 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
4 Zone Panel-ravel Make
4 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
2 Zone Panel-ravel Make
2 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
Detect Fire 4 Zone Panel
Detect Fire 4 Zone Panel Four zonal fire system panels can cover two different areas, making them an attractive choice for smaller/ Bigger buildings. A zone is a group of one or more detectors, collected by their common location or in the form of a collective circuit of all the detectors on that circuit.
Close
Detect Fire 2 Zone Panel
Detect Fire 2 Zone Panel Two zonal fire system panels can cover two different areas, making them an attractive choice for smaller buildings. A zone is a group of one or more detectors, collected by their common location or in the form of a collective circuit of all the detectors on that circuit.
Close
Agni Hunt 32 Zone Fire Alarm Panel
Agni Hunt 32 Zone Fire Alarm Panel of Microprocessor-based fire alarm panels provides reliable and cost-effective solutions to fir detection, for small installations which are 2 zones.
