Your list is empty, add products to the list to send a request
Previous product
Back to products
Agni Hunt AHSD-16 Optical Smoke Detector White
₹ 1,180.00 GST included
Next product
Agni Hunt AHHD-650 Heat Detector
₹ 851.96 GST included
Agni Hunt AHHD-12 Heat Detector
₹ 1,141.06 GST included
Agni Hunt AHHD-12 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
In stock
Description
Agni Hunt AHHD-12 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit. These Heat Detectors are available with 135ø F (57ø C) rating for fixed temperature. Heat Detectors are most suitable for environments where rapid fire development can be expected. when selecting the location on the ceiling for the heat detector, do not locate it in the direct path of hot or cold airflow. Refer to the detector specifications for the recommended maximum spacing. Earlier detector response may be obtained by reducing the spacing between detectors.
Features
- UL listed.
- Dual LED for 360ø visibility.
- Polarity free wiring
- Advanced detection.
- Easy installation and maintenance.
- Sleek low-profile housing design.
- Regular 100mm base.
- . The detector can be removed usinga screwdriver to release the tamper-resistant lockingfingers.
Specifications
- Power Source 12v
- Operating Temperature 0øC ~ +50øC
- Surge Current (max.) 100 æA - Start-up time (max.) 60 s - Stand by current (max.) 45 æA
- Non-condensing - Heat Sensitivity 135ø F/ROR - Start-up current 200 æA
- Operating Humidity 0% ~ 95% RH
Related products
Close
Edward SIGA-COD+SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base
Edward SIGA-COD + SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while advanced electrochemical CO sensing technology provides performance benefits that keep occupants safe from carbon monoxide, the silent killer.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Solo 250ml (A10) Smoke Detector Tester Can
Solo 250ml (A10) Smoke Detector Tester Can Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.ÿ
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
Agni Smoke Detector (MOQ – 3Pcs)
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Qutak QT 180-2L Heat Detector Dual LED
Heat detectors are vital devices for detecting fires and ensuring safety. As the name suggests, the devices sense the temperature of a room or area in order to detect fires. Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.