Your list is empty, add products to the list to send a request
Previous product
Back to products
Ambetronics EMB-770-FLP Flame Proof Radiant Energy Ember Detector
₹ 101,775.00 GST included
Next product
Safe Pro ABC Powder ISI 90% MAP – 5 kg bag
₹ 2,230.20 GST included
Ambetronics Flame Proof Probe type Fixed tempareture Heat Detector
₹ 33,187.50 GST included
Detection Technique. Rated Alarm Temperature. Set Point. Auto-Reset Operation. LED Indicators. Low power consumption. Supports flexible or armored shielded cable. Operates on a supply voltage power of 18 to 36 VDC, typically 24 VDC. User-Friendly Operation.
In stock
Description
Ambetronics Flame Proof Probe type Fixed tempareture Heat Detector is an innovative solution for detecting heat build-up in various industrial settings. Unlike conventional heat detectors, this device operates with a unique configuration. It features a Potential-Free NO (Normally Open) contact output, which remains open when the ambient temperature is below the set point and becomes short when the temperature exceeds the set point. The detector has a wide temperature range of 40°C to 90°C, with a factory preset option available. Designed for reliability, the detector offers fast response to overheat conditions and comes equipped with auto-reset functionality, resetting itself after the temperature cools down. With low power consumption (less than 3W), it ensures energy efficiency. The electrical specifications include a supply voltage range of 18 to 36 VDC and two relay contacts for primary and secondary alarms.
Features
- Detection Technique
- Rated Alarm Temperature
- Auto-Reset Operation
- LED Indicators
- Low power consumption
- Supports flexible or armored shielded cable
- Operates on a supply voltage power of 18 to 36 VDC, typically 24 VDC
- User-Friendly Operation
Specifications
- Brand : Ambetronics
- Wiring : Supports flexible or armored shielded cable (1.5mm) for supply and output, with two pairs of black-white wires for Class A and Class B looping
- Weight : Approximately 125g for the sensing element and 2kg for the body
- Mounting Options : Wall, Stand, and Pipe mounting
Related products
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Agni Smoke Detector (MOQ – 3Pcs)
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
Solo 110-001 Fiberglass 4 Section Telescopic Pole 1.75m
Solo 101 Telescopic Pole 1.5m which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Agni Hunt Standalone Smoke Detector
Agni Hunt Standalone Smoke Detector uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Edward SIGA-COD+SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base
Edward SIGA-COD + SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while advanced electrochemical CO sensing technology provides performance benefits that keep occupants safe from carbon monoxide, the silent killer.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.