Your list is empty, add products to the list to send a request
Previous product
Back to products
Dahua Addressable Smoke Detector (RI Support), DHI-HY-2301B (MOQ-2Pcs)
₹ 1,534.00 GST included
Next product
Dahua Addressable Manual Call Point, DHI-HY-1200B (MOQ-2Pcs)
₹ 1,534.00 GST included
Dahua Addressable Heat Detector (RI Support), DHI-HY-2311B (MOQ-2Pcs)
₹ 1,534.00 GST included
4W-B Heat Detector, Compatible with remote Indicator. Non-loosening Screws on base Terminal for easy Installation. Contacts material is highly Acid-resistant and Rust-resistant. Designed in accordance with EN54-5 standard.
In stock
Description
Dahua Addressable Heat Detector (RI Support), DHI-HY-2311B is a 4W-B Addressable Heat Detector that Operates
on a Polarity-free Two-wire power supply. It Primarily utilizes a thermal sensing Element to Detect Fires. During the initial stages of a Fire, a significant amount of Heat is Released, causing a Rapid increase in the Surrounding temperature. The Thermal element in the Detector undergoes a Physical change in response to Abnormal Temperature, temperature rate, and temperature differential, converting the temperature signal into an Electrical Signal to trigger an Alarm.
Features
- 4W-B Heat Detector, Compatible with remote Indicator
- Non-loosening Screws on base Terminal for easy Installation
- Contacts material is highly Acid-resistant and Rust-resistant
- Designed in accordance with EN54-5 standard
Specifications
- Brand : Daua
- Surveillance Area : For installation heights below 4 m, the coverage area is 150 m2, For installation heights between 4m and 12m, the coverage area is 80 m2
- Remote Indicator : Support
- Working Principle : Heat detection
- Alarm Mode : Indicator light alarm
- Fixed Detection Threshold : 62 Deg.C plus or minus 3 Deg.C (144 Deg.F plus or minus 37.4 Deg.F)
- Dynamic Detection : 1 to 30 K min-1
- Operating Temperature : minus 10 Deg.C to plus 50 Deg.C
- Dimensions (with base) : 100 mm × 46.3 mm ( 3.94 inch × 1.82 inch)
- Weight (with base) : 102 g (0.22 lb)
- Installation : Ceiling Mount
Related products
Close
Agni Hunt AHHD-12 Heat Detector
Agni Hunt AHHD-12 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Detect Fire Heat Detector
Detect Fire Heat Detector Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
TX7130R Conventional Reflective Beam Detector
TX7130R Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for a real user-friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in alignment commissioning.
Agni Hunt – Optical Smoke Detector White – Model : PASD 24
Agni Hunt AHSD-650 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Safe On Conventional Heat Detector
Safe On Conventional Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
