Your list is empty, add products to the list to send a request
Previous product
Back to products
Dahua Motorised Beam Detector, DHI-HY-BD1
₹ 15,635.00 GST included
Next product
Dahua Conventional Sounder, DHI-HY-C154 (MOQ-4Pcs)
₹ 649.00 GST included
Dahua Conventional Sounder Strobe, HI-HY-C151 (MOQ-2Pcs)
₹ 1,416.00 GST included
Meets all Requirements of latest EN54. Two-wire, Polarity-free realizes convenient wiring. Completes EMC test, it has Strong anti-electromagnetic Interference ability, High stability and Reliability. Ultra-low consumption and Strong loading capacity. Loud sound output over 75 dB(A) at 3 meters, accompanied with Bright Alarm signal. Non-loosening screws on base Terminal for easy Installation. Contacts material is highly acid-resistant and Rust-resistant. Designed in accordance with EN54-3 and EN54-23 standards.
In stock
Description
Dahua Conventional Sounder Strobe, HI-HY-C151 is a Mated Product of the Conventional Fire Alarm Control Panel. Integrated with Two-wire and Polarity-free Technology, it sends out an Audible and Light alarm signal to remind people when Fire occurs.
Features
- Meets all Requirements of latest EN54
- Two-wire, Polarity-free realizes convenient wiring
- Completes EMC test, it has Strong anti-electromagnetic Interference ability, High stability and Reliability
- Ultra-low consumption and Strong loading capacity
- Loud sound output over 75 dB(A) at 3 meters, accompanied with Bright Alarm signal
- Non-loosening screws on base Terminal for easy Installation
- Contacts material is highly acid-resistant and Rust-resistant
- Designed in accordance with EN54-3 and EN54-23 standards
Specifications
- Brand : Daua
- Working Voltage : DC9V-DC30V
- Rated Power : 132.6mW
- Current : Standby current: less or equal to 270μA, Alarm current: less or equal to 30mA
- Alarm Mode : Visual and audible alarm
- Alarm Volume : Modified Tone:4s-5s. Sound Pressure Level : 75dB-115dB (A) at 3 m (9.84 ft)
- Operating Temperature : Minus 10 Deg.C to Plus 55 Deg.C
- Operating Humidity Less or equal to 95 percent RH (no condensation)
- Dimensions (with base) 125 mm × 80 mm × 40 mm (4.92 inch × 3.15 inch × 1.57 inch)
- Weight (with base) 118 g (0.26 lb)
- Installation Wall Mount
Related products
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Close
Detect Fire Heat Detector
Detect Fire Heat Detector Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Solo 250ml (A10) Smoke Detector Tester Can
Solo 250ml (A10) Smoke Detector Tester Can Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.ÿ
Close
Solo (200-001) Universal Detector Removal Tool (HSN 82055990)
Solo (200-001) Universal Detector Removal Tool With the ability to create various size combinations, the universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement.
Close
Agni Hunt AHHD-650 Heat Detector
Agni Hunt AHHD-650 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
Edward SIGA-COD+SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base
Edward SIGA-COD + SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while advanced electrochemical CO sensing technology provides performance benefits that keep occupants safe from carbon monoxide, the silent killer.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
