Your list is empty, add products to the list to send a request
Previous product
Back to products
Edward SIGA-CT1 Addressable Monitor Module
₹ 3,717.00 GST included
Next product
Edward EC-100R Beam Detector With Reflector (HSN 85319000)
₹ 87,910.00 GST included
Edward SIGA-COD+SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base
₹ 9,888.40 GST included
Edward SIGA-COD + SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while advanced electrochemical CO sensing technology provides performance benefits that keep occupants safe from carbon monoxide, the silent killer.
In stock
Description
Edward SIGA-COD + SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while advanced electrochemical CO sensing technology provides performance benefits that keep occupants safe from carbon monoxide, the silent killer. Like all Signature Series detectors, the SIGA-COD is an intelligent device that gathers analog information from its CO sensor, converting this data into digital signals. To make an alarm decision, the detectors on-board microprocessor measures and analyzes sensor readings over time. Digital filters remove signal patterns that are not typical of life safety events, thus virtually eliminating unwanted alarms. The SIGA-COD includes an advanced carbon monoxide sensor. When the electrochemical cell reaches its end of life after approximately ten years, the detector signals a trouble condition to the control panel. Refer to the control panel documentation for specific end of life timing.
Features
- Next Generation CO Sensing Technology
- Advanced electrochemical carbon monoxide sensing technology
- Uses existing wiring
- Automatic device mapping
- Sensor Markings Provide Easy Testing Identification
- Up To 250 Total Signature Adresses Per Loop
- Non-volatile memory
- Electronic addressing
- Automatic day/night sensitivity adjustment
Specifications
- Brand: Edward
- Condition New
- Usage/Application Fire Detection
- Operating Voltage 15.20 to 19.95 VDC
- Normal operating current 32 ohmA
- Vibration level 10 to 35 Hz, with an amplitude of 0.01 in.
- Compatible detector testers Testifire 1000, Testifire 2000
- Operating environment 32 to 120 DegreeF (0 to 49 DegreeC), 0 to 90% RH, noncondensing
- Construction High Impact Engineering Polymer, White
- Storage temperature -4 to 140DegreeF
- Storage temperature -4 to 140DegreeF
Related products
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Solo 111-001 Fiberglass Extension Pole 0.5 Mtrs
Solo 108 Telescopic Pole 3m core element of the Solo range of products is the telescopic pole, which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Mcp-yellow Ravel Make
Mcp-yellow Ravel MakeManual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.