Your list is empty, add products to the list to send a request
Previous product
Back to products
Edward SIGA-OSHD-FCN + SIGA-SB Addressable Multi Detector with Base
₹ 4,425.00 GST included
Next product
Edward SIGA-OSD + SIGA-AB4G Addressable Smoke Detector with Sounder Base
₹ 4,838.00 GST included
Edward SIGA-OSD-FCN + SIGA-SB Intelligent Photoelectric Smoke Detector with Standard Base
₹ 3,540.00 GST included
Edward SIGA-OSD + SIGA-SB Addressable Smoke Detector with Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
In stock
Description
The Signature Optica Series SIGA-OSD smoke detector brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Like all Signature Optica Series detectors, the SIGA-OSD is an intelligent device that gathers analog information from multiple optical sensors, converting this data into digital signals. Utilizing dual optical wavelengths combined with multiple detection angles, the SIGA-OSD differentiates particles that are not representative of actual smoke. Particle data is input into digital filters which feed a series of ratios removing signal patterns that are typical of nuisance sources, thus reducing unwanted alarms. To make an alarm decision, the detector’s on board microprocessor measures and analyzes all optical sensor readings and compares this information to preprogrammed settings.
Compatibility:
The SIGA-OSD detector is compatible only with control panels using a Signature Loop controller.
SIGA-OSD-FCN: Manufactured at FCN.
Features
- Multi-criteria optical smoke sensing technology
- Five Sensitivity Settings
- Wide 0.5 to 4.36 %/ft. (1.6 to 13.6 %/m) smoke obscuration
- Integrated nuisance rejection reducing unwanted alarms from general cooking particulates
- Uses existing wiring
- Listed to UL 268 7th edition
- Automatic device mapping
- Sensor Markings Provide Easy Testing Identification
- Up To 250 Total Signature Addresses Per Loop
- Twenty Pre-Alarm Settings
- Automatic Day/Night Sensitivity Adjustment
- Bicolor (Green/Red) Status LED
Specifications
- Brand: Edward
- Condition New
- Operating Voltage 15.20 to 19.95 VDC
- Alarm Current 45 µA
- Air Velocity 0 to 4,000 ft./min (0 to 20.32 m/s)
- Normal operating current 32 µA
- Vibration level 10 to 35 Hz, with an amplitude of 0.01 inch
- Smoke Sensitivity Range UL/ULC: 0.5 to 4.36 %/ft. (1.6 to 13.6 %/m) obscuration
- Air velocity 0 to 4,000 ft./min (0 to 20 m/s)
- Wall mounting 12 in. (305 mm) max. from ceiling
- Operating environment 32 to 120°F (0 to 49°C), 0 to 93% RH, noncondensing
- Construction High Impact Engineering Polymer, White
- Storage temperature -4 to 140°F (-20 to 60°C)
- Environmental compensation Automatic
- Agency Listings CAN/ULC-S529, UL 268-7, UL 268A
Related products
Close
Variex VFA-WSD Wireless Photoelectric Smoke Detector 9 Volt – Fire Alarm
Variex VFA-WSD Wireless Photoelectric Smoke Detector 9 Volt – Fire Alarm is an advanced fire safety device designed to detect
Close
RE 317D Sl Ravel Addressable Smoke Detector
UL Listed Analogue addressable smoke detector with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication
Close
GSTDI-9101E Addressable Intelligent Combined Heat Photoelectric Smoke Detector
Electrically addressed, can be modified by programmer Strong environmental adaptability due to drift
compensation Self-diagnostic Reed switch test Dirty chamber checking Fire LED allows 360° viewing Possible to switch off polling LED Remote indicator output 2 levels smoke sensitivities, level 1 complies with
EN 54-7 LPCB approved at EN 54-7 and EN 54-5
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Agni Smoke Detector
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Edward SIGA-OSD + SIGA-AB4G Addressable Smoke Detector with Sounder Base
Edward SIGA-OSD +
SIGA-AB4G Addressable Smoke Detector with Sounder Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Close
On Spotfire Smoke Detector
On Spotfire Smoke Detector fire alarm Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Ultra Fire Smoke Detector optical
Conventional somke and heat detector. It's working by optical fibre. ULTRA FIRE manufacture complete fire dedectors system nad panel (from 2 zone to 64 zone). Usage/Application.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.