Your list is empty, add products to the list to send a request
Previous product
Back to products
GST Hand Held Programmer, P-9910B
₹ 13,570.00 GST included
Next product
GST Intelligent Rate of Rise and Fixed Temperature Heat Detector, DI-9103E (MOQ-2Pcs)
₹ 1,947.00 GST included
GST Hand Held Programmer – Latest version, P-9920
₹ 15,694.00 GST included
Hand held Unit, Small Size. Easy to Carry and Operate. Register On-line Devices. Identify Device Type and Report Repeat Address on same Loop. Test Device functionality. Set and Read Device’s Address and Sensitivity. Adopt 128 x 128 Dot Matrix LCD Screen with Backlight Display. Low Power Consumption mode, automatic shutdown. Low Battery Indication.
In stock
Description
GST Hand Held Programmer – Latest version, P-9920 is a Portable Handheld Device, Using this Tool, can Register Online loop devices (such as Detectors, Modules, MCP, Sounder and Sounder strobes, etc.) instead of FACP. It also can Identify Device Type, Test Device Functionality, and check repeat Devices on same loop. It is very Helpful for Engineer to do Troubleshooting during devices Installation and project commissioning. In addition this Tool also can set and Read Device address, Sensitivity, Parameter etc. instead of handheld Programmer.
Features
- Hand held Unit, Small Size
- Easy to Carry and Operate
- Register On-line Devices
- Identify Device Type and Report Repeat Address on same Loop
- Test Device functionality
- Set and Read Device's Address and Sensitivity
- Adopt 128 x 128 Dot Matrix LCD Screen with Backlight Display
- Low Power Consumption mode, automatic shutdown
- Low Battery Indication
Specifications
- Brand : GST
- Power : 4 pcs AA 1.5V batteries or DC5V USB power supply
- Current : Operating current less than or equal to l2mA, Standby cument less than or equal to 0.3mA
- Operating environment : Temperature minus 10 Deg. C to plus 50 Deg. C, Relative humidity 95percent, no condensation
- Dimensions : 166mmX62mmX26mm
- Ingress Protection Rate : IP40
Related products
Close
Eaton – Eaton 2-channel FIRE AND SMOKE DETECTOR INTERFACE Model no : MTL5561
The Eaton MTL5561 is a loop-powered, 2-channel intrinsically safe interface designed for connecting conventional fire and smoke detectors located in
Close
Edwards Weatherproof Strobe Model no : WG4RF
The Edwards WG4RF Weatherproof Strobe is a high-performance visual notification appliance designed for fire alarm and emergency signaling systems in
Close
Honeywell – Honeywell Addressable Relay Module Model no : HM-D240CMO-UL
The Honeywell Addressable Relay Module – HM-D240CMO-UL is a high-performance control module designed for advanced fire alarm and life safety
Close
Edwards Weatherproof MCP Model no: MPRS1-D45W-GE
The Edwards MPRS1-D45W-GE Weatherproof Manual Call Point (MCP) is a robust and reliable fire alarm initiating device designed for outdoor
Close
GST Communication Card for GST200N Panel, P-9930
Standard RS232 and USB interfaces. Connecting GST Graphic Monitor Center
and GST Defining Tool. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized. Default DIP Code is 6.
Close
GST Single Loop Card for GST200N panel, LC200
Connecting with Loop Devices. Add one Loop to connect 242 Addressable Devices. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
EDWARDS – EST3 to BMS Communications Bridges – Model FSB-PC2 and FSB-PCLW
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
