Your list is empty, add products to the list to send a request
Previous product
Back to products
Heinrich DPA1120 (Class-D Single Channel 120W Power Amplifier
₹ 60,475.00 GST included
Next product
Heinrich DPA1500 (Class-D Single Channel 500W Power Amplifier)
₹ 107,616.00 GST included
Heinrich DPA1250 (Class-D Single Channel 250W Power Amplifier)
₹ 63,425.00 GST included
Switching Power Technology Digital Power Amplifier. Class-D PA Power Amplifier of Minimum Power Consumption. Less rack Space and Less Heat Generation. Single Channel power amplifier of 19 inch Rack Mount Unit. Rated Power output at 250W. Speaker output 100V and 8Ohms. Balanced input by Phoenix Connector. Each input with Separate gain Control. Each channel with high-pass-filter. Built-in Auto Standby feature to save power Consumption.
In stock
Description
Heinrich DPA1250 (Class-D Single Channel 250W Power Amplifier) is of Switching Power Technology, which Features of Minimum Power Consumption and much Higher Efficiency of 85 percent, moreover, it helps to save Installation Rack Space, Generate less heat so as to extend its Performance life span as a result. The DPA1250 is of Rated Power output at 250W, so it could be used as Digital Public Address System at minimum cost. The Versatile Loudspeaker outputs of 100V & Low impedance 8ohms enable it meet both PA fixed installation and Hi-Stereo sound installation jobs.
Features
- Switching Power Technology Digital Power Amplifier
- Class-D PA Power Amplifier of Minimum Power Consumption
- Less rack Space and Less Heat Generation
- Single Channel power amplifier of 19 inch Rack Mount Unit
- Rated Power output at 250W
- Speaker output 100V and 8Ohms
- Balanced input by Phoenix Connector
- Each input with Separate gain Control
- Each channel with high-pass-filter
- Built-in Auto Standby feature to save power Consumption
Specifications
- Brand : Heinrich
- Description : Class D Single Channel 250W Power Amplifier
- Rated Power Output : 250W
- Speaker Output : 8ohm and 100V
- Frequency Response : L/H Cut off 20Hz to 20Khz
- Input : 0.775V, 0dBu, Balanced phonenix connector
- Input Impedance : 10 kohm
- THD : Less than 0.1 percent (1khz/ minus3dBv, 100W)
- S/N Ratio : More than 80dB
- Power Consumption : 290W
- Weight : 4.5kg
Related products
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP26-12 Powersafe Plus Lead Acid Battery
Exide EP26-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP645 Sealed Lead Acid Batteries
Vision CP645 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP65-12 Powersafe Plus Lead Acid Battery
Exide EP65-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
