Your list is empty, add products to the list to send a request
Previous product
Back to products
Ravel RE 316H-2L Conventional Fire Alarm Heat Detector
₹ 1,652.00 GST included
Next product
Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel
₹ 6,195.00 GST included
Description
Ravel RE 316SH – 2L Conventional Photoelectric & Heat Detector designed to work with all conventional Panels. These detectors are low profile and have O dual LEDs for 360 visual indications. The blinking LEDs indicate normal operating conditions whereas the steady state indicates fire status. RE 316SH-2L is a fixed cum rate of rising heat detector using a thermistor. These detectors will raise an alarm when the detector reaches 59 C(Fixed) or when the change in temperature exceeds the rate of rising of 11 C / min.
Features
- Advanced detection and communication protocol
- Easy installation and maintenance
- Sleek low-profile housing design
- Dual LED’s for 360 visibility
- Regular 100mm base
- UL Approved.
Specifications
- Product: Conventional Photoelectric & Heat Detector
- Brand: Ravel
- Model: RE 316SH-2L
- Operating Voltage : 9 ~ 33V DC
- Reset Voltage : less than 1V
- Installation Space : 5 meters
- Diameter : 100 mm dia
- Height : 46 mm with base
- Weight : 130g with base
- ŸIP Rating : IP - 42
Related products
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Apollo System Sensor Conventional Smoke Detector White
Apollo System Sensor Conventional Smoke Detector White operates using the light scatter principle and is ideal for applications where slow-burning or smouldering fires pose a potential risk. Discovery? is a range of high-specification, analogue addressable fire detectors and alarm devices.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Mcp-yellow Ravel Make
Mcp-yellow Ravel MakeManual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Ravel RE 316H-2L Conventional Fire Alarm Heat Detector
Ravel RE 316H-2L Conventional Fire Alarm Heat Detector is designed to work with all conventional Panels. These detectors are low
Close
Simplex Multi Sensor Detector with Base
Simplex Multi-Sensor Detector with Base combines the established performances of a TrueAlarm photoelectric smoke sensor with a fast-acting and accurate
Close
Mcp-green Ravel Make
Mcp-green Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Apollo 55000-885APO+45681-210APO Multi-Sensor Detector With XPERT 7 Base
Apollo 55000-885APO+45681-210APO Multi-Sensor Detector With XPERT 7 Base combines independent optical smoke and temperature sensors for better fire detection in
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.