Your list is empty, add products to the list to send a request
Previous product
Back to products
RE-717M Ravel Addressable Manual Call Point
₹ 3,068.00 GST included
Next product
Testifire 1001-001 Smoke and Heat Detector Test Kit
₹ 218,300.00 GST included
Description
Model ALN-E(HFP) is a Photoelectric Smoke Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.
The ALN-E(HFP) incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Sensors in the majority of applications. This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.
The ALN-E(HFP) smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber while keeping out ambient light.
Features
- Removable, High Performance chamber
- Twin LEDs allow 360 viewing – green when polling, turn red in fire
- Locking mechanism (sensor to base)
- Variable sensitivity
- Electronically addressed
- Pulsing/non-pulsing controlled from panel*
- Approved by LPCB & VdS
- SIL Level 2 approved variants available
Specifications
- Ordering Code ALN-E(HFP
- Operating Voltage 17 – 41 V d.c.
- Low Power Mode (typ) 120 A
- Quiescent Current (typ) 400 A
- Alarm Current (controlled by CIE) 9.1 mA (excluding remote indicator
- Transmission Method Digital Communications Using ESP
- Operating Temperature Range -10 °C to + 50 °C
- Operating Humidity 95% RH - Non Condensing (at 40 °C)
- Storage Temperature Range -30 °C to +60 °C
- Storage Humidity <80% RH at 60 °C
- Colour / Case Material White / ABS
- Weight (g) 95
- Diameter (mm) / Height (mm) 100 / 45
- Compatible Bases YBN-R/3, YBO-R/SCI, YBO-BS, YBO-BSB, YBNR/3(SCI
- Base Fixing Centres (mm) 48 ~ 74
- Approvals LPCB & VdS
Related products
Close
Ultra Fire Smoke Detector optical
Conventional somke and heat detector. It's working by optical fibre. ULTRA FIRE manufacture complete fire dedectors system nad panel (from 2 zone to 64 zone). Usage/Application.
Close
Edwards SD-T18 SuperDuct Signature Duct Smoke Detector(18-inch Sampling Tube)
Edwards SuperDuct Signature Duct Smoke Detector detects the presence of smoke under extended temperature ranges in a building’s HVAC system.
Close
Agni Hunt AHSD-16 Optical Smoke Detector White
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Freeze Fire Smoke Detector
Freeze Fire Smoke Detector fire alarm Heat Detectors are most suitable for environments where rapid fire development can be expected. when selecting the location on the ceiling for the heat detector, do not locate in direct path of hot or cold air flow. Refer to the detector specifications for the recommended maximum spacing. Earlier detector response may be obtained by reducing the spacing between detectors.
Close
GSTDI-9101E Addressable Intelligent Combined Heat Photoelectric Smoke Detector
Electrically addressed, can be modified by programmer Strong environmental adaptability due to drift
compensation Self-diagnostic Reed switch test Dirty chamber checking Fire LED allows 360° viewing Possible to switch off polling LED Remote indicator output 2 levels smoke sensitivities, level 1 complies with
EN 54-7 LPCB approved at EN 54-7 and EN 54-5
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Agni Smoke Detector
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Apollo Optical Smoke Detector White
Apollo Optical Smoke Detector White uses light sensing technology to detect a fire. The external detector moulding has an indicator LED which is white in quiescent state but produces a red light in alarm.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.