Your list is empty, add products to the list to send a request
Previous product
Back to products
Simplex 4099-9701 Addressable Manual Call Point
₹ 3,186.00 GST included
Next product
Simplex 4100-3103 Isolator Module for MAPNET
₹ 50,173.60 GST included
- The minimum required quantity for GST Conventional Smoke Detector with Base, JTY GF GST104+DZ-03 (MOQ-3Pcs) (FSIN0000362529) is 3.
Simplex 4098-9714 photoelectric Smoke Detector
₹ 3,422.00 GST included
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Description
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Features
- Sealed against rear air flow entry
- Interchangeable mounting
- EMI/RFI shielded electronics
- Photoelectric technology sensing
- 360° smoke entry for optimum response
- Built-in insect screens
- Protocol IDNet, MAPNET II
- Voltage 24 VDC
- Voltage Range 18 – 32 VDC
Specifications
- Brand Simplex
- Unit of Measurement EA (Each)
- Type Detector
- Style Plug-In
- Detectable Medium Smoke
- Detection Method Photoelectric
- Programming Set via Base
Related products
Close
Apollo – XP95 Optical Smoke Detector – 55000-600APO
The Apollo XP95 Optical Smoke Detector (55000-600APO) is a high-performance addressable smoke detector designed to detect visible smoke particles associated with smouldering fires. Part of Apollo's XP95 intelligent range, it offers reliable early warning fire detection, low power consumption, and fast communication with control panels.
Close
GST Intrinsically Safe Conventional Photoelectric Smoke Detector, DC-9102(IS)
Drift Compensation Enables strong Environmental Adaptability. Integrated Algorithm for analyzing fire, improving the sensitivity highly. Self-diagnostic. Removable Innovative Sensing Chamber, easy for maintenance. Fire LED allows 360 Deg. C Viewing.
Close
GST Intrinsically Safe Conventional Combination Heat Photoelectric Smoke Detector, DC-9101(IS)
Sensitivities programmable. Strong Environmental Adaptability due to Drift Compensation. Integrated Algorithm for analyzing fire, improving the sensitivity highly. Self-diagnostic. Reed switch testing. Removable innovative sensing chamber, easy for maintenance. Reporting dirt fault for contaminated Chamber. Fire LED allows 360 Deg. Viewing. 3-level Sensitivities and fixed Temperature or rate of rise programmable.
Close
Dahua Standalone Smoke Alarm, (5-year Replaceable Battery), DHI-HY-SA13A (MOQ-3Pcs)
Test and Silence Features in one Single Button. Low Quiescent current consumption. Loud sound output over 85 dB(A) at 3 meters. Surface-mount Device (SMD) Circuit Board Design. Low battery warning signal. Replaceable battery. Easy installation.
Close
Fapt-851 Notifier Addressable Multi Detector
The FAPT-851AUS Acclimate™ detector uses a combination of photoelectric and thermal sensing technologies to increase immunity to false alarms. Unlike
Close
INTELLIGENT ADDRESSABLE OPTICAL SMOKE SENSOR WITH IN BUILT FAULT ISOLATOR C/w Base ULCAP320+UCAB300
Rapid and accurate fire detection in your addressable fire alarm system with the ULCAP320 + UCAB300 Intelligent Addressable Optical Smoke
Close
Dahua Conventional Multi Sensor Detector (Without RI Support), DHI-HY-C135 (MOQ-3Pcs)
3W-B Multi-sensor Smoke and Heat Detector with Two-wire and Polarity-free power supply. Reliable communication: Built-in microprocessor, Stable performance. Ultra-low power consumption: Ultra-low monitoring current and Alarm Current. High-performance sensor Featuring a split-spectrum Optical Smoke Detector and a Sensitive Thermistor. Designed in accordance with EN54-5 and EN54-7 standards.
Close
GST Stand Alone Smoke Detector, S-9102R (MOQ-2Pcs)
Self contained Optical Smoke Detector and Alarm Buzzer. Easy installation. Test/ Reset Button. Low Battery indication. Relay Output.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.