Your list is empty, add products to the list to send a request
Previous product
Back to products
TNA Intelligent Addressable Optical Smoke Heat Detector
₹ 1,711.00 GST included
Next product
TNA Intelligent Dual Heat Detector
₹ 1,534.00 GST included
TNA Intelligent Addressable Optical Smoke Detector
₹ 1,652.00 GST included
EN54-7:2000 PlusA1:2002 PlusA2:2006 Compliance. LPCB Approved. Using microprocessor technology with memory capacity up to 10 events. Analogue sending and digital addressing Provide real time algorithm to the control panel Smart linear drift compensation. Onsite adjustable parameter 360-degree visual indicator. Removable chamber against dust and small insect Ancillary remote indicator output. Aesthetically pleasing design.
In stock
Description
TNA Intelligent Addressable Optical Smoke Detector-TX7100 is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns. Secure and speedy communication through the on-board processor enables the detector to make its own decision, resulting in greater automation. In the event of fire, the integral microprocessor analyses the signal according to factors such as signal strength and rate of increase, then confirms these patterns with the pre- programmed fire scenarios and smoke patterns, for a faster and safer response. Once it is confirmed, the LED indicates the sensor status and parallel sending communication signal to the control panel. The TX7100 detector is compatible to the TX7004 analogue intelligent fire alarm control panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.
Features
- EN54-7:2000 PlusA1:2002 PlusA2:2006 Compliance
- LPCB Approved
- Using microprocessor technology with memory capacity up to 10 events
- Analogue sending and digital addressing Provide real time algorithm to the control panel Smart linear drift compensation
- Onsite adjustable parameter 360-degree visual indicator
- Removable chamber against dust and small insect Ancillary remote indicator output
- Aesthetically pleasing design.
Specifications
- Brand : TNA
- Input Voltage : 24VDC [16V to 28V]
- Current Consumption : Standby 0.6mA, Alarm: 4mA
- Protocol/Addressing : T&A, Value range from 1 to 254
- Sensitivity : As per stipulated standard
- Indicator : Single LED / 360-degree Visual
- Material / Colour : ABS / White Glossy finishing
- Dimension / Heigh : Diameter 99.7 mm / 57 mm
- Weight : 145g (with Base), 90g (without Base)
- Operating Temperature : Minus10degreeC to Plus 50degree C
Related products
Close
Ravel RE 326-2SL Photo Electric Smoke Detector
Ravel Conventional Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Solo A5 Smoke Detector Tester Aerosol Spray 250ml
Solo A5 Smoke Detector Test is used to test smoke detectors on whether they are functioning correctly or not. A must have for those who want to ensure they have the best possible emergency exit plan for any smoke related scenario. The A5 replicates smoke quickly through the use of a Dispenser. The formula is fast clearing, non toxic and leaves no harmful residue behind so there is no mess or need to worry.
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Agni Smoke Detector (MOQ – 3Pcs)
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo (424-101) Solo Heat Detector Tester
Solo (424-101) Solo Heat Detector Tester Codes and standards require functional tests to
introduce (simulated) smoke through the detector
vents and into the sensing chamber. The Solo 330
dispenser is the most popular device for achieving
this, benefiting as it does, from a cup big enough
for the great majority of detectors but still small
enough not to be obstructive and unwieldy.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.