Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA H-2WP Design Speaker for Public Address & Voice Evacuation Systems
₹ 51,920.00 GST included
Next product
TOA H-3WP Design Speaker for Public Address & Voice Evacuation Systems
₹ 82,600.00 GST included
TOA H-3 Design Speaker for Public Address & Voice Evacuation Systems
₹ 74,340.00 GST included
2-way Design Speaker. Dome Tweeters and Neodymium Magnet cone Woofers. Quality Audio between the Speakers as well as Directly in front of each Speaker Unit. 180 Deg. Coverage Pattern, eliminating dead Audio Spaces. Either Low Impedance (8 ohm / 16 ohm) or High impedance (70 V / 100 V).
Easy Unobtrusive Installation at above Head-height. Fire-resistant ABS according to UL94: V-0.
In stock
Description
TOA Design Speaker, H-3 is a Wall-mountable 2-way Speaker that Provides Horizontally-wide Dispersion.
Features
- 2-way Design Speaker
- Dome Tweeters and Neodymium Magnet cone Woofers
- Quality Audio between the Speakers as well as Directly in front of each Speaker Unit
- 180 Deg. Coverage Pattern, eliminating dead Audio Spaces
- Either Low Impedance (8 ohm / 16 ohm) or High impedance (70 V / 100 V)
- Easy Unobtrusive Installation at above Head-height
- Fire-resistant ABS according to UL94: V-0
Specifications
- Brand : TOA
- Enclosure : Sealed type
- Rated Input : 30 W (16 ohm, high impedance)
- Rated Impedance : 8 ohm, 16 ohm 100 V line: 330 ohm (30 W), 670 ohm (15 W), 1.3 kohm (7.5 W), 70 V line: 170 ohm (30 W), 330 ohm (15 W), 670 kohm (7.5W), 1.3 kohm (3.75 W)
- Power Handling : 150 W (continuous program/ 8 ohm) 50 W (continuous pink noise/ 8 ohm)
- Frequency Response : 100 Hz - 20 kHz (minus 10 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a wall.)
- Speaker Component : Low frequency: 10 cm cone-type x 2, High frequency: 2.5cm dome-type (neodymium magnet)
- Input Terminal : Detachable screw terminal, (plus)/(minus) 2 each (for bridging connection)
- Cable Requirements : Solid cable, stranded cable: 0.2 - 2.5 mm2 (AWG No. 24 - 14 equivalent)
- Finish : Enclosure: Fire-resistant ABS resin, black, Front frame: Fire-resistant ABS resin, off-white, paint, Punched net: Steel plate, off-white, paint, Base frame: Steel plate, plating
- Dimensions : 295 (W) x 318 (H)mm x 129 (D) mm
- Weight : 3.3 kg
- Included Accessories : Front grille x 1, Base frame x 1, Electrical box mounting screw x 1 set
Related products
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 22 Zone Fire Alarm Panel
Agni 22 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP65-12 Powersafe Plus Lead Acid Battery
Exide EP65-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP632 Sealed Lead Acid Batteries
Vision CP632 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
