Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA WT-2100 Portable Receiver for Wireless Microphone & Conference Systems
₹ 50,740.00 GST included
Next product
TOA YA-1000A Fault Detection Circuit Module for PA Network Control & System Integration
₹ 23,600.00 GST included
TOA WT-4820 Dual Channel Receiver for Wireless Microphone & Conference Systems
₹ 40,120.00 GST included
Dual Channel Diversity tuner working with the WTU-4800 Tuner Modules. Mountable in a 19 inch Rack using the optional mounting Brackets MB-WT4. Other features: Noise Squelch, Phantom powering for Antennae, mix/solo, switch, AF peak LED, antenna A/B-LED. Technical data refers to the use in combination with 2 x WTU-4800 Tuner Modules.
In stock
Description
TOA Dual Channel Receiver, WT-4820 is a Diversity Tuner can accept up to Two Optional Wireless tuner modules of UHF band (WTU-4800). It can be Mounted in a component rack using an optional mounting bracket (MB-WT3, MB-WT4).
Features
- Dual Channel Diversity tuner working with the WTU-4800 Tuner Modules
- Mountable in a 19 inch Rack using the optional mounting Brackets MB-WT4
- Other features: Noise Squelch, Phantom powering for Antennae, mix/solo, switch, AF peak LED, antenna A/B-LED
- Technical data refers to the use in combination with 2 x WTU-4800 Tuner Modules
Specifications
- Brand : TOA
- Power Source : AC mains (supplied AC adapter must be used.)
- Power Consumption : 250 mA (12 V DC, when operating with two tuner modules)
- Receiving Frequency : 506 – 865 MHz, UHF
- Mixing Input : minus 20 dB2, 10 kohm, unbalanced, phone jack
- Antenna Input : 75 ohm, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
- Antenna Output : 75 ohm, BNC (Gain 0 dB)
- Operating Humidity : 30 percent to 85 percent RH (no condensation)
- Finish : Resin, blackq
- Dimensions : 210 (W) x 44 (H) x 181 (D) mm (8.27 inch x 1.83 inch x 7.13 inch)
- Weight : 770 g (1.71 lb) (without tuner module)
- Included Accessories : AC adapter x 1, Whip antenna x 2, Rubber foot x 4
Related products
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide CS 7-12 Gel Solar Battery
Exide CS 7-12 Gel Solar Battery manufactured by Exide used for various applications like UPS, CFL lights etc. It is a Lead Acid rechargeable battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Vision CP832 S Sealed Lead Acid Batteries
Vision CP832 S Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Vision CP612 Sealed Lead Acid Batteries
Vision CP612 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide EP65-12 Powersafe Plus Lead Acid Battery
Exide EP65-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
