Your list is empty, add products to the list to send a request
TOA D-001R Line Input Module with DSP for PA Network Control & System Integration
₹ 36,580.00 GST included
Two RCA Phone inputs per Channel Provides Stereo Summing. Digital Signal Processing – 10-band parametric EQ, – Bass/ Treble, Loudness,
– High pass / low pass filters, Compressor. Max. 4 Modules/ Chassis.
In stock
Description
TOA Line Input Module with DSP, D-001R is a Line Input Plug-in Module Designed for use with the 9000 Series Amplifiers. It has 2-channel Unbalanced inputs of RCA Jacks. Input Signals to both Channels are Mixed together. The D-001R can Process effect for TONE/EQ/COMPRESSOR to Two Inputs Independently.
Features
- Two RCA Phone inputs per Channel Provides Stereo Summing
- Digital Signal Processing - 10-band parametric EQ, - Bass/ Treble, Loudness, - High pass / low pass filters, Compressor
- Max. 4 Modules/ Chassis
Specifications
- Brand : TOA
- Power Supply : Plus 24 V DC, Minus 24 V DC, Plus 6 V DC
- Current Consumption : 20 mA (at Plus 24 V DC), 20 mA (at Minus 24 V DC), 60 mA (at Plus 6 V DC)
- Input : 2 channels, 2RCA/ch mixed, 10 kohm, unbalanced, RCA pin jack
- Input Sensitivity : -60, -54, -48, -42, -36, -30, -24, -18, -10 dB* (selectable)
- A/D Converter : 24 bit ADC
- Sampling Frequency : 48 kHz
- Frequency Response : 20 Hz - 20 kHz, Plus 1, Minus 3 dB
- Total Harmonic Distortion : 0.008 Percent (at 1 kHz, 20 Hz - 20 kHz BPF, Input sensitivity: -10 dB)
- Signal to Noise Ratio : Over 70 dB (at 20 Hz - 20 kHz BPF, Input short, Input sensitivity: -10 dB)
- Crosstalk : Over 75 dB (at 20 kHz, Input sensitivity: -10 dB)
- Tone Control : Bass: Plus or Minus 12 dB (at 100 Hz) Treble: Plus or Minus 12 dB (at 10 kHz)
Related products
Close
Vision CP1212 Sealed Lead Acid Batteries
Vision CP1212 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP26-12 Powersafe Plus Lead Acid Battery
Exide EP26-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Vision CP612 Sealed Lead Acid Batteries
Vision CP612 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 22 Zone Fire Alarm Panel
Agni 22 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
