Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA IP Audio Interface, IP-A1AF
₹ 44,545.00 GST included
Next product
TOA IP Power Amplifier 12W, IP-A1PA12
₹ 60,652.00 GST included
TOA Microphone Panel, IP-A1MP
₹ 19,942.00 GST included
Audio Accessory Unit to be Used in Conjunction with IP-A1 Series Devices for Having Two-way. Conversations or Audio Monitoring. Omni-directional Electret Condensor Microphone. Momentary Type Push Switch to Initiate a Call. Indicator Lights during Control Input is being Triggered. 1 Control Input and 1 Control Output. 1 Electronically-balanced Audio Output (0dB, 200 ohm). Surface or Flush mounting with a Standard Electrical Box.
In stock
Description
TOA Microphone Panel, IP-A1MP is a Microphone Panel that is Equipped with a Microphone, an Activation switch and a Status Indicator. It can be Installed with a Standard Electrical Box as surface or Flush Mounting. This Panel can be used as a Two-way Conversation or an Audio Monitoring Microphone when used in Conjunction with IP-A1 Series Devices.
Features
- Audio Accessory Unit to be Used in Conjunction with IP-A1 Series Devices for Having Two-way
- Conversations or Audio Monitoring
- Omni-directional Electret Condensor Microphone
- Momentary Type Push Switch to Initiate a Call
- Indicator Lights during Control Input is being Triggered
- 1 Control Input and 1 Control Output
- 1 Electronically-balanced Audio Output (0dB, 200 ohm)
- Surface or Flush mounting with a Standard Electrical Box
Specifications
- Brand : TOA
- Phantom Power : 9 V DC - 26 V DC
- Current Consumption : 8 mA or less (at 12 V DC)
- Microphone : Omni-directional electret condenser microphone
- Frequency Response : 100 Hz - 10 kHz
- Microphone Output : 0 dB (1), 200 ohm, (Volume adjustable), electronically-balanced, push-in terminal block
- Control Input : No-Voltage make contact input, open Voltage: 5 V DC, short-circuit current: 0.2 mA or less, push-in terminal block
- Call Button : Momentary type (Control output circuit is closed while pressed)
- Indicator : Green (Lit during control input) (2)
- Dimensions : 44.6 (W) x 107 (H) x 29 (D) mm (excluding projection)
- Weight : 170 g (0.37 lb)
- Included Accessories : Plate x 1, Plate mounting screw (M3.5 x 5.5, preinstalled on the plate) x 2, Box mounting screw (M4 x 35) x 2
Related products
Close
Ravel Hooter Alarm
Ravel Plastic Red MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel Plastic Yellow MCP Hooter Alarm
Ravel Plastic Yellow MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Vision CP1232 Sealed Lead Acid Batteries
Vision CP1232 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Vision CP832 S Sealed Lead Acid Batteries
Vision CP832 S Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
