Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Multi-channel Digital Power Amplifier, DA-500FH
₹ 188,918.00 GST included
Next product
TOA Digital Power Amplifier, 1x1000W, DA-X1000S-AS
₹ 86,671.00 GST included
TOA Multi-channel Digital Power Amplifier, DA-550F
₹ 188,918.00 GST included
4 ohm Speaker Output. 4x 550 W Rated Output. Independent Power Supply for each Channel. Light weight and Compact. Rack mountable with 2 Units. Stack upto 5 Units without open spaces between Units. Selectable Stereo or Bridge Operation (DA-550F). Forced-air Cooling System. Low Heat Dissipation. Comprehensive Protection Circuitry. Removable Dust Filters for easy Maintenance.
In stock
Description
TOA Multi-channel Digital Power Amplifier, DA-550F is a 4-Channel Digital Power Amplifier featuring Lightweight, Compact, High power output, and High Efficiency. It Delivers 550 W x 4 channels (4 ohm output) using a Switching Power Supply. Each channel is equipped with an Independent Power Section. Its Control/Monitor Terminals permit power ON/OFF control of the individual channels and status monitoring for the power ON/OFF on each channel, protection on each channel, and fan operation. Prepare the control panel or status monitor display panel separately. It can be mounted in an EIA Standard equipment rack (2 unit size).
Features
- 4 ohm Speaker Output
- 4x 550 W Rated Output
- Independent Power Supply for each Channel
- Light weight and Compact
- Rack mountable with 2 Units
- Stack upto 5 Units without open spaces between Units
- Selectable Stereo or Bridge Operation (DA-550F)
- Forced-air Cooling System
- Low Heat Dissipation
- Comprehensive Protection Circuitry. Removable Dust Filters for easy Maintenance.
Specifications
- Brand : TOA
- Power Source : 220 - 240 V AC, 50/60 Hz
- Amplification System : Class D
- Power Consumption : 480 W (based on EN standards) 2750 W (rated output 4 ohm x 4) 1550 W (rated output 8 ohm x 4)
- Input : 4 circuits, plus 4 dB (1.23 V) (input level control in maximum position), 10 kohm, electronically-balanced, removable terminal block (3 pins), XLR-3-31 type Connector. CH 1 mode ON/OFF switch (ON: CH1 to All Ch, OFF: Each ch)
- Rated Output : 4 channels: 550 W x 4 (4 ohm), 350 W x 4 (8 ohm) 2 channels (BRIDGE): 1100 W x 2 (8 ohm) M4 screw terminal, distance between barriers: 8.8 mm (0.35)
- Frequency Response : 20 Hz - 20 kHz (minus 2 dB, plus 1dB)
- Finish : Panel: Aluminum, black, alumite Case: Plated steel sheet
- Dimensions : 482 (W) × 88.4 (H) × 404.2 (D) mm
- Weight : 9 kg
- Included Accessories : Power cord (2 m (6.56 ft), Removable terminal plug (3 pins) …4, Rack mounting screw (with washer) …4, Tamper-proof cap …4
Related products
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Vision CP1212 Sealed Lead Acid Batteries
Vision CP1212 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Vision CP1232 Sealed Lead Acid Batteries
Vision CP1232 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
