Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA VX-1000MC-AS Matrix Controller for PA Network Control & System Integration
₹ 237,180.00 GST included
Next product
TOA VX-100RM-EA IP Remote Microphone for Public Address & Paging Systems
₹ 185,260.00 GST included
TOA VX-1000PF Peering Frame for PA System Installation & Mounting
₹ 128,620.00 GST included
Supplies Power to the Power Amplifier Module inserted in it. Displays Operation and Fault Status of the Power Amplifier Module. Supports Redundancy for power supply. If Power supply A Fails, Automatically switch to Power supply B. When Power supply A Returns to Normal, it will Automatically return to Power supply A. Standard 4U rack-mounted design.
In stock
Description
TOA Peering Frame, VX-1000PF is used to supply power to the power amplifier module inserted in it. The operation and fault status of the power amplifier module can be displayed. It can also show if the standby power amplifier is in working order. It supports redundancy for power supply, usually from the Power supply A, when the Power supply A fails, it can automatically switch to Power supply B. When Power supply A returns to normal, it will automatically return to Power supply A. Standard 4U rack-mounted design.
Features
- Supplies Power to the Power Amplifier Module inserted in it
- Displays Operation and Fault Status of the Power Amplifier Module
- Supports Redundancy for power supply
- If Power supply A Fails, Automatically switch to Power supply B
- When Power supply A Returns to Normal, it will Automatically return to Power supply A
- Standard 4U rack-mounted design
Specifications
- Brand : TOA
- Power Supply : AC POWER IN A/B: AC 220 - 240 V, 50/60 Hz, European standard terminal
- Power Consumption : 3.5 W (When the main power port & power amplifier unit is not inserted)
- Power Amplifier Module Slot : 4 Channels
- Stand-by Amplifier Module Slot : 1 Channel
- Operating Temperature minus 10 deg.C to plus 55 deg.C
- Finish Pane l: Aluminum profile surface, oxidation treatment, black
- Dimensions : (W x H x D) 483 × 177 × 395 mm
- Weight : 8.77 kg
- Accessory : Foot Pad (FF-7) x 4, Fuse (6S15A) x 1, Power Cable x 2 (only when a single device is shipped)
Related products
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Vision CP1212 Sealed Lead Acid Batteries
Vision CP1212 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Agni Hunt 14 Zone Fire Alarm Panel
Agni 14 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Exide CS 7-12 Gel Solar Battery
Exide CS 7-12 Gel Solar Battery manufactured by Exide used for various applications like UPS, CFL lights etc. It is a Lead Acid rechargeable battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
