Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA Pendant Speaker, PE-304BU
₹ 19,942.00 GST included
Next product
TOA Pendant Speaker, PE-604BU
₹ 23,187.00 GST included
TOA Pendant Speaker, PE-304WU
₹ 19,942.00 GST included
Stylish Design Inspired by Modern lighting Fixtures. Ideally Suited for BGM & Announcements. 8 ohm and 25 V/70 V/100 V operation. Input Impedance is easily changed with a rotary switch on the top of the Speaker. With speaker cable, GRIPPLE R hanging wire & safety wire pre-attached, for faster, easier and more secure installation. UL certified: UL Code: UL1480 UUMW, ULC-S541. Bass-refelx Type.
In stock
Description
TOA Pendant Speaker, PE-304BU is a Pendant Speaker Designed for the Installations suspended from a ceiling. A directly-attached 5 m (16.4 ft) hanging wire allows the speaker to be suspended from high ceilings. The PE-304BU is driven on both high-impedance (100 V, 70 V and 25 V) and low-impedance (8 ohm) lines. The input power (impedance) can be easily changed at the upper side of the speaker. The PE-304BU is certified to UL 1480 UUMW and ULC-S541 standards. Using the supplied GRIPPLE(R) hangers will facilitate the speaker mounting height adjustment.
Features
- Stylish Design Inspired by Modern lighting Fixtures
- Ideally Suited for BGM & Announcements
- 8 ohm and 25 V/70 V/100 V operation
- Input Impedance is easily changed with a rotary switch on the top of the Speaker
- With speaker cable, GRIPPLE R hanging wire & safety wire pre-attached, for faster, easier and more secure installation
- UL certified: UL Code: UL1480 UUMW, ULC-S541
- Bass-refelx Type
Specifications
- Brand : TOA
- Enclosure : Bass-reflex type
- Rated Input : 30 W (100 V, 70 V line, 8 ohm), 3.7 W (25 V line)
- Sensitivity : 90 dB (1 W, 1 m) (330 Hz - 3.3 kHz, pink noise)
- Frequency Response : 95 Hz - 20 Hz (-10 dB)
- Speaker Component : 12 cm (5 inch) cone-type plus balanced Dome-tweeter (Coaxial)
- Compliance/Certifications : UL 1480 UUMW, ULC-S541
- Operating Temperature : minus 10 Deg. C to plus 50 Deg. C (14 Deg. F to 122 Deg. F)
- Finish - Enclosure: ABS resin, black, Grille: Surface-treated steel plate mesh, black, paint
- Dimensions : Ø186 x 275 (H) mm (Ø7.32 inch x 10.83 inch) (unit only)
- Weight : 2 kg (4.41 lb) (unit only)
Related products
Close
Exide EP26-12 Powersafe Plus Lead Acid Battery
Exide EP26-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Agni Hunt 22 Zone Fire Alarm Panel
Agni 22 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Vision CP832 S Sealed Lead Acid Batteries
Vision CP832 S Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP632 Sealed Lead Acid Batteries
Vision CP632 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Ravel Plastic Yellow MCP Hooter Alarm
Ravel Plastic Yellow MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
