Your list is empty, add products to the list to send a request
Previous product
Back to products
TOA VM-3360VA System Management Amplifier for PA & Voice Alarm Amplification Systems
₹ 475,540.00 GST included
Next product
TOA VX-030DA System Amplifier for PA & Voice Alarm Amplification Systems
₹ 103,840.00 GST included
TOA VX-015DA System Amplifier for PA & Voice Alarm Amplification Systems
₹ 77,880.00 GST included
Low loss Modular Class-D Amplifier. Modules to be Mounted in the Frame Units. Power level: 150 W. Can Easily be Removed or Replaced simply by Unplugging them, no need for Special Tools. Dust filter, easy to clean. 100 V Output without transformer resulting in light-weight units. Fuse easily accessible from rear.
In stock
Description
TOA System Amplifier, VX-015DA is a Digital Power Amplifier used for the VX-3000 systems which is compliant with the European Standard EN54 for fire alarm systems. It is a module type with 1 channel of class-D digital power amplifier, which contribute to energy-saving and light weight design. The VX-015DA also features standby mode to be set for reducing standby power consumption. It requires a dedicated control units VX-3004F, VX-3008F, VX-3016F and power supply unit VX-3000DS.
Features
- Low loss Modular Class-D Amplifier
- Modules to be Mounted in the Frame Units
- Power level: 150 W
- Can Easily be Removed or Replaced simply by Unplugging them, no need for Special Tools
- Dust filter, easy to clean
- 100 V Output without transformer resulting in light-weight units
- Fuse easily accessible from rear
Specifications
- Brand : TOA
- Power Source : 31 V DC (operating range: 20 to 33 V DC), DC power in: M4 screw terminal, distance between barriers: 11 mm (0.43 inch)
- Amplification System : Class D
- Power Consumption : 40 W at 31 V DC
- Output Voltage : 100 V (70 V, 50 V: selectable)
- Minimum Impedance Load : 67 ohm (at 100 V line), 47 ohm (at 70 V line), 33 ohm (at 50 V line)
- Maximum Capacitive Load : 0.5 muF
- Number of Channels : 1
- Input : DA CONTROL LINK: Nylon connector (15 pins)
- Output : DA OUTPUT LINK: Nylon connector (2 pins)
- Finish : Surface-treated steel plate
- Dimensions : 82.8 (W) x 91 (H) x 358.2 (D) mm (3.26 inch x 3.58 inch x 14.1 inch)
Related products
Close
Exide EP100-12 Powersafe Plus Lead Acid Battery
Exide EP100-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Ravel Plastic Green MCP Hooter Alarm
Ravel Plastic Green MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP6100 Sealed Lead Acid Batteries
Vision CP6100 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide CS 7-12 Gel Solar Battery
Exide CS 7-12 Gel Solar Battery manufactured by Exide used for various applications like UPS, CFL lights etc. It is a Lead Acid rechargeable battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP150-12 Powersafe Plus Lead Acid Battery
Exide EP150-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
