Your list is empty, add products to the list to send a request
ASES ROR Heat Detector with base Model No. AS-602-HD
₹ 708.00 GST included
Address programmable through Dip Switch. Heat algorithm greatly improves sensitivity. Dual LED design provides 360 Degree viewing. Remote indicator output available. Fix temperature at 58 Degree C. Reliable ?re detection in areas with a wide temperature range from -10 Degree C to Plus 60 Degree C. Well suited to environments such as hotel bedrooms, warehouses and loading docks. Fix temperature at 58 Degree C.
In stock
Description
ASES ROR Heat Detector with base Model No.AS-602-HD is Digital Addressable uses a single thermistor to sense the air temperature at the detector position. The thermistor is connected in a resistor network, which produces a voltage output dependent on temperature. The design of the resistor network, together with the processing algorithm in the micro-controller, gives an approximately linear characteristic from minus 10 Degree C to 60 Degree C. This linearised signal is further processed, depending
upon the response mode selected, and converted to an Digital
output.
Features
- Address programmable through Dip Switch
- Heat algorithm greatly improves sensitivity
- Dual LED design provides 360 Degree viewing
- Remote indicator output available
- Fix temperature at 58 Degree C
- Reliable ?re detection in areas with a wide temperature range from -10 Degree C to Plus 60 Degree C
- Well suited to environments such as hotel bedrooms, warehouses and loading docks
- Fix temperature at 58 Degree C
Specifications
- Operating Zone Voltage : 19-24 Vdc
- Standby Current : 40 Micro Amps
- Alarm Current : 24 mA without remote indicator
- Fire LED : Green : Flashes every 3s normally. RED : Steadily Illuminates after alarming.
- Sensor : Single NTC Thermistor
- Response Temperature : 58 Degree C
- Model No. : AS-602-HD
- Brand : ASES
- Weight : 150 G Approx
Related products
Close
Agni Hunt AHHD-12 Heat Detector
Agni Hunt AHHD-12 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Solo 110-001 Fiberglass 4 Section Telescopic Pole 1.75m
Solo 101 Telescopic Pole 1.5m which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Close
Agni Hunt AHSD-16 Optical Smoke Detector White
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Agni Smoke Detector (MOQ – 3Pcs)
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo (200-001) Universal Detector Removal Tool (HSN 82055990)
Solo (200-001) Universal Detector Removal Tool With the ability to create various size combinations, the universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.