Your list is empty, add products to the list to send a request
Close
TOA Close-Talking Microphone, YP-M201
Designed to be Exclusively used with an Optional WM-2100 Portable Transmitter. Suitable for use in High Noise Level Areas. Electret Condenser Type.
Close
TOA Tie-Clip Microphone, YP-M101
Electret Condenser Microphone with Unidirectional pickup pattern for focused sound capture. Equipped with a ø3.5 mm Monaural Plug for Direct connection to Compatible TOA Wireless Transmitter.
Close
TOA Wall Mounting Bracket, YC-850
Designed to Mount the N-8000 Series Interface units to a Wall. Finished with Surface-treated Steel Plate, Black, 30 Percent gloss.
Close
TOA Back Box, YC-841
Specially Designed for the N-8033MS Flush-mount Master Station. Finished with Surface-treated Steel Plate, White.
Close
TOA Outdoor Wall Mount Box, YC-823
Designed to Surface-mount RS-170, RS-180, RS-470 and RS-480 on a Wall. Finished with Stainless steel plate, off-white.
Close
TOA Indoor Wall-Mount Box, YC-822
Finished with Surface-treated Steel Plate, Off-White.
Close
TOA Flush-Mount Box, YC-801
Finished with Colored Chrome Plating.
Close
TOA 2-gang Electrical Box, YC-302 (MOQ-2Pcs)
2-gang Electrical Box (with cover) of Wall flush Mount Type. Finished with SPHT, MFZn4 (glazed chromate)
Close
TOA Wall Mounting Bracket, YC-290 (MOQ-2Pcs)
Specially Designed for the Hands-free master station of the N-8000 Series. Can be Installed on a Wall or its Front Operation Panel. Can be Inclined from the Desk Surface by attaching the YC-290.
Close
TOA Wall Mounting Bracket, YC-280 (MOQ-2Pcs)
Designed for the Master station of the N-8000 series Packet Intercom system. Can be Installed on a Wall or its Front Operation Panel. Can be Inclined from the Desk Surface by attaching the YC-280.
Close
TOA Surface Mount Back Box, YC-251
Designed for the N-8031MS Flush-mount Hands-Free Master Station. Permits the N-8031MS to be installed on a wall when the N-8031MS can not be flush-mounted on a wall.
Close
TOA Flush Mount Back Box, YC-241
Used with the N-8031MS Flush-Mount Hands-Free Master Station. Designed to surface-mount N-8031MS in a wall.
Close
TOA Back Box, YC-150E
Used with the PC-391/PC-391T or N-8050DS Flush-mounting Kit. Non-RoHS product.
Close
TOA Flush Mount Back Box, YC-150 (MOQ-2Pcs)
Designed to Flush-Mount PC-391/391T Wall Flush-Mount Speaker and N-8000 Series. Applicable models : PC-391, PC-391T, N-8050DS, N-8640DS and N-8650DS.
Close
TOA Rack Runner, YA-706
Used to Support Heavy Rack Equipment. YA-706 is Supplied in Pairs.
Close
TOA Fault Detection Circuit Module, YA-1000A
Detects the Power Amplifier's Failure.
Close
TOA Dual Channel Receiver, WT-4820
Dual Channel Diversity tuner working with the WTU-4800 Tuner Modules. Mountable in a 19 inch Rack using the optional mounting Brackets MB-WT4. Other features: Noise Squelch, Phantom powering for Antennae, mix/solo, switch, AF peak LED, antenna A/B-LED. Technical data refers to the use in combination with 2 x WTU-4800 Tuner Modules.
Close
TOA Portable Receiver, WT-2100
Up to 5 Different Channels can be Simultaneously used in the same Location.
18 hours Continuous Operation with a LR6 (1.5V) Alkaline Battery. Battery Indicator to Indicate Battery Consumption Status. Designed for the use with TOA's optional eaphone YP-E401. Commercial Earphones can be also connected (plug diameter: 3.5 mm, impedance: over 16 ohm.
Close
TOA Dual Channel Wireless Set, WS-432-AS
Handheld Microphone and Beltpack provides up to 10 Hours continuous usage with the use of only 1 x AA Battery ensuring long term Cost Efficiency. Long Operating range of approx. 100 m (line of sight). IR Sync. Selectable Up to 16 simultaneous channels depending on Region.
Close
TOA Single Channel Wireless Set, WS-430-AS
Handheld Microphone and Beltpack provides up to 10 Hours continuous usage with the use of only 1 x AA Battery ensuring long term Cost Efficiency. Long Operating range of approx. 100 m (line of sight). IR Sync. Selectable Up to 16 simultaneous channels depending on Region.
