Your list is empty, add products to the list to send a request
ASES ROR Heat Detector with base Model No. AS-602-HD
₹ 708.00 GST included
Address programmable through Dip Switch. Heat algorithm greatly improves sensitivity. Dual LED design provides 360 Degree viewing. Remote indicator output available. Fix temperature at 58 Degree C. Reliable ?re detection in areas with a wide temperature range from -10 Degree C to Plus 60 Degree C. Well suited to environments such as hotel bedrooms, warehouses and loading docks. Fix temperature at 58 Degree C.
In stock
Description
ASES ROR Heat Detector with base Model No.AS-602-HD is Digital Addressable uses a single thermistor to sense the air temperature at the detector position. The thermistor is connected in a resistor network, which produces a voltage output dependent on temperature. The design of the resistor network, together with the processing algorithm in the micro-controller, gives an approximately linear characteristic from minus 10 Degree C to 60 Degree C. This linearised signal is further processed, depending
upon the response mode selected, and converted to an Digital
output.
Features
- Address programmable through Dip Switch
- Heat algorithm greatly improves sensitivity
- Dual LED design provides 360 Degree viewing
- Remote indicator output available
- Fix temperature at 58 Degree C
- Reliable ?re detection in areas with a wide temperature range from -10 Degree C to Plus 60 Degree C
- Well suited to environments such as hotel bedrooms, warehouses and loading docks
- Fix temperature at 58 Degree C
Specifications
- Operating Zone Voltage : 19-24 Vdc
- Standby Current : 40 Micro Amps
- Alarm Current : 24 mA without remote indicator
- Fire LED : Green : Flashes every 3s normally. RED : Steadily Illuminates after alarming.
- Sensor : Single NTC Thermistor
- Response Temperature : 58 Degree C
- Model No. : AS-602-HD
- Brand : ASES
- Weight : 150 G Approx
Related products
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Close
TX7130R Conventional Reflective Beam Detector
TX7130R Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for a real user-friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in alignment commissioning.
Close
Agni Hunt AHHD-650 Heat Detector
Agni Hunt AHHD-650 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Solo 423-001 Heat Detector Tester 110/120 Volt
SOLO 423-001 No Climb Heat Detector Tester Mains powered heat detector tester. Available in both 110 / 120 and 220 / 240 volt versions the Solo 423 and 424 are the professionals choice where cables and leads are acceptable.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
Detect Fire Heat Detector
Detect Fire Heat Detector Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.