Your list is empty, add products to the list to send a request
Previous product
Back to products
ASES Eight Zone microprocessor based Conventional Fire Alarm Panel, LCD and LED both Model No. IR8Z
₹ 10,325.00 GST included
Next product
ASES Twelve Zone microprocessor based Fire alarm Panel Model No.PR12Z
₹ 16,484.60 GST included
ASES Ten Zone microprocessor based Fire alarm Panel Model No.PR10Z
₹ 15,399.00 GST included
Advance Micro controller based Fire Alarm Panel. 10 to 48 zone Expandable. 16×2 character LCD Display. Mains, A.C Fail, fuse, Charging, Rev. Batt. Indication. Zone wise fire, open, short LED indications. Zone wise fire, open, short testing facility. Zone healthy indications. Zone isolations facility through switch. Extra Potential free contact for fire & fault. Trickle & fast charging facility. Reset ,alarm cancel, Lamp test, controls etc. Compatible with any make conventional smoke & heat detector.
In stock
Description
ASES Ten Zone microprocessor based Fire alarm Panel, Model No.PR10Z is 16 bit micro processor based Smart & Intelligent conventional fire alarm control panel, menu based, 128×64 character display, 500 event logging, inbuilt clock, auto calibration, low high voltage alert, expandable up to 72 zones, password protection, SQTL & CE Approved.
Features
- Advance Micro controller based Fire Alarm Panel
- 10 to 48 zone Expandable
- 16x2 character LCD Display
- Mains, A.C Fail, fuse, Charging, Rev. Batt. Indication.
- Zone wise fire, open, short LED indications
- Zone wise fire, open, short testing facility
- Zone healthy indications
- Zone isolations facility through switch
- Extra Potential free contact for fire & fault
- Reset, alarm cancel, Lamp test, controls etc.
- Compatible with any make conventional smoke & heat detector
Specifications
- Power Supply : 230 V AC, 50 Hz 24 V DC
- Standby Power : 24 V DC
- Normal Loop Voltage : 23.20 V DC
- Communication Wise : Single pair of twisted cable.
- Dimensions : 15.5 inch x 14 inch x 5 inch
- Color : Siemens Gray, Marble White, Red
- Model No. : PR-10Z
- Brand : ASES
Related products
Close
Exide EP150-12 Powersafe Plus Lead Acid Battery
Exide EP150-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel ABS RE-716MY Green Fire Alarm System
Ravel ABS RE-716MY Green Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Vision CP645 Sealed Lead Acid Batteries
Vision CP645 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP200-12 Powersafe Plus Lead Acid Battery
Exide EP200-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Exide EP42-12 Powersafe Plus Lead Acid Battery
Exide EP42-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Exide EP65-12 Powersafe Plus Lead Acid Battery
Exide EP65-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.