Your list is empty, add products to the list to send a request
Previous product
Back to products
Dahua Motorised Beam Detector, DHI-HY-BD1
₹ 15,635.00 GST included
Next product
Dahua Conventional Sounder, DHI-HY-C154 (MOQ-4Pcs)
₹ 649.00 GST included
Dahua Conventional Sounder Strobe, HI-HY-C151 (MOQ-2Pcs)
₹ 1,416.00 GST included
Meets all Requirements of latest EN54. Two-wire, Polarity-free realizes convenient wiring. Completes EMC test, it has Strong anti-electromagnetic Interference ability, High stability and Reliability. Ultra-low consumption and Strong loading capacity. Loud sound output over 75 dB(A) at 3 meters, accompanied with Bright Alarm signal. Non-loosening screws on base Terminal for easy Installation. Contacts material is highly acid-resistant and Rust-resistant. Designed in accordance with EN54-3 and EN54-23 standards.
In stock
Description
Dahua Conventional Sounder Strobe, HI-HY-C151 is a Mated Product of the Conventional Fire Alarm Control Panel. Integrated with Two-wire and Polarity-free Technology, it sends out an Audible and Light alarm signal to remind people when Fire occurs.
Features
- Meets all Requirements of latest EN54
- Two-wire, Polarity-free realizes convenient wiring
- Completes EMC test, it has Strong anti-electromagnetic Interference ability, High stability and Reliability
- Ultra-low consumption and Strong loading capacity
- Loud sound output over 75 dB(A) at 3 meters, accompanied with Bright Alarm signal
- Non-loosening screws on base Terminal for easy Installation
- Contacts material is highly acid-resistant and Rust-resistant
- Designed in accordance with EN54-3 and EN54-23 standards
Specifications
- Brand : Daua
- Working Voltage : DC9V-DC30V
- Rated Power : 132.6mW
- Current : Standby current: less or equal to 270μA, Alarm current: less or equal to 30mA
- Alarm Mode : Visual and audible alarm
- Alarm Volume : Modified Tone:4s-5s. Sound Pressure Level : 75dB-115dB (A) at 3 m (9.84 ft)
- Operating Temperature : Minus 10 Deg.C to Plus 55 Deg.C
- Operating Humidity Less or equal to 95 percent RH (no condensation)
- Dimensions (with base) 125 mm × 80 mm × 40 mm (4.92 inch × 3.15 inch × 1.57 inch)
- Weight (with base) 118 g (0.26 lb)
- Installation Wall Mount
Related products
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo 250ml (A10) Smoke Detector Tester Can
Solo 250ml (A10) Smoke Detector Tester Can Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.ÿ
Close
Solo (424-101) Solo Heat Detector Tester
Solo (424-101) Solo Heat Detector Tester Codes and standards require functional tests to
introduce (simulated) smoke through the detector
vents and into the sensing chamber. The Solo 330
dispenser is the most popular device for achieving
this, benefiting as it does, from a cup big enough
for the great majority of detectors but still small
enough not to be obstructive and unwieldy.
Close
Agni Hunt AHHD-12 Heat Detector
Agni Hunt AHHD-12 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Agni Hunt AHSD-16 Optical Smoke Detector White
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo 110-001 Fiberglass 4 Section Telescopic Pole 1.75m
Solo 101 Telescopic Pole 1.5m which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
