Your list is empty, add products to the list to send a request
Previous product
Back to products
Edward SIGA-IM2 Fault Isolator Module For Isolating Shorted
₹ 2,492.16 GST included
Next product
Edward SIGA-CR Addressable Control Module For Third Part Equipments
₹ 3,717.00 GST included
Edward SIGA-CC1 Addressable Control Interface Module for Hooter/Strobe or Hooter
₹ 3,776.00 GST included
Edward SIGA-CC1 Addressable Control Interface Module for Hooter/Strobe or Hooter Upon command from the loop controller, the module connects supervised Class B signal or telephone circuits to the respective riser input. The riser input can be 24 VDC (to operate polarized audible and visible signal notification appliances), 25 or 70 VRMS (to operate audio evacuation speakers), or firefighter telephones.
In stock
Description
Edward SIGA-CC1 Addressable Control Interface Module for Hooter/Strobe or Hooter Upon command from the loop controller, the module connects supervised Class B signal or telephone circuits to the respective riser input. The riser input can be 24 VDC (to operate polarized audible and visible signal notification appliances), 25 or 70 VRMS (to operate audio evacuation speakers), or firefighter telephones. The module does not provide signal synchronization. To meet UL 864 requirements for horn and strobe signal synchronization, you must install a Genesis Signal Master module. The SIGA-CC1 module requires one address on the signaling line circuit (SLC). Addresses are assigned electronically. There are no address switches.
Features
- Optional covers are available to allow LED to be viewed after installation (requires mounting bracket, ordered separately)
- Supervised Class B monitoring of normally open, dry contacts
- Visible LED flashes to indicate communications
- Mounts in standard single gang electrical box
- Enclosed design minimizes dust infiltration
- Screw terminals for wiring connections
Specifications
- Brand: Edward
- Condition New
- Usage/Application Fire Detection
- Input Output Control Method 24 VDC
- Basic Error Limit Voltage Ranges 24 VDC
- Current Consumption From Backplane Bus 5 AMP
Related products
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Close
Ravel ABS RE-716MY Yellow Fire Alarm System
Ravel ABS RE-716MY Yellow Fire Alarm System Intelligent Manual Call Point has been designed to operate on a loop of intelligent fire detection devices. An alarm is initiated bypressing the resettable element.
Close
Exide EP150-12 Powersafe Plus Lead Acid Battery
Exide EP150-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP632 Sealed Lead Acid Batteries
Vision CP632 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Exide EP1212 Powersafe Plus Lead Acid Battery
Exide EP1212 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Ravel Hooter Alarm
Ravel Plastic Red MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Ravel Plastic Yellow MCP Hooter Alarm
Ravel Plastic Yellow MCP Hooter Alarm According to the variegated prerequisites of our customers, we are putting forth a wide combination of Wireless Fire Hooter Cum Flasher. The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature.
Close
Exide EP120-12 Powersafe Plus Lead Acid Battery
Exide EP120-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.