Your list is empty, add products to the list to send a request
Previous product
Back to products
Concord - Fire Fighting Helmets (With Hood)
₹ 2,478.00 GST included
Next product
Agni - Exit sign Board Green Led (SINGLE & DOUBLE SIDE)
₹ 3,342.94 GST included
EDWARDS – EST3 to BMS Communications Bridges – Model FSB-PC2 and FSB-PCLW
₹ 138,768.00 GST included
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only.
Description
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only
Features
- Links EST3 with building Management System Sends EST3 events to a BMS system via serial or Ethernet connections, helping to reduce interface hardware costs
- Supplied with field protocols, Modbus, BACnet and Metasys One module provides selection of any single protocol – no need to purchase separate software or hardware modules
- Serial and Ethernet ports Flexible connection type for the BMS system: RS-232 or RS485, LonWorks, or Ethernet 10/100 Base-T
- Software configuration Speeds installation and setup
- Selectable connection to BMS via RS-485 or Ethernet Enable Serial-to-Serial protocol translation for bridging EST3 or Serial-to-Ethernet to Industrial Automation or Building Automation equipment
- RoHS compliant Provides readiness for the Restriction of Certain Hazardous substances (RoHS) directives that are becoming prevalent in many jurisdictions.
Specifications
- Product Type: BMS Communication Bridge
- Compatible System: EST3 Fire Alarm System
- Fire Panel Connection: RS-232 Serial
- BMS Connection: LonWorks (FTT-10)
- Fire Panel Connection: Serial
- Input Voltage: 9 – 30 VDC
- Operating Current: FSB-PC2: 110 mA nominal (120 mA max) FSB-PCLW: 130 mA nominal (140 mA max)
- Operating Temperature: 0°C to 49°C (32°F to 120°F)
- Mounting: Inside EST3 or EST3X cabinet using mounting bracket
Related products
Close
GST Loop Relay Module, P-9903
Digital Communication with Fire Alarm Control Panel (FACP) ensures Immunity to
Electromagnetic Interference and Reliable
Operation. Optoisolated Output Signal, resistant to Industrial Frequency Interference. Optocoupler Isolation Technology is used between the Transmitter and Receiver Circuit.
Close
GST Hand Held Programmer – Latest version, P-9920
Hand held Unit, Small Size. Easy to Carry and Operate. Register On-line Devices. Identify Device Type and Report Repeat Address on same Loop. Test Device functionality. Set and Read Device's Address and Sensitivity. Adopt 128 x 128 Dot Matrix LCD Screen with Backlight Display. Low Power Consumption mode, automatic shutdown. Low Battery Indication.
Close
GST Communication Card for GST200N Panel, P-9930
Standard RS232 and USB interfaces. Connecting GST Graphic Monitor Center
and GST Defining Tool. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
GST Class A RS485 Network Card for GST200N panel & NRP00 Repeater Panel, P-9940A
Two Photoelectric Isolation RS485 Interfaces. Suitable for Ring Network. Card Shouldn’t be Inserted and Removed when it is Energized.
Close
Edwards – EST4 Audio IO and Telephone Riser Source Module Model no : EST-4-AUDTELS
The Edwards EST-4-AUDTELS Audio I/O and Telephone Riser Source Module is an advanced communication interface designed for the EST4 Emergency
Close
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized. Default DIP Code is 6.
Close
TrueSafe – TrueSafe Flame Proof Bi-Metallic heat detector (Probe type) Model no : TDS-FBHT001
The TrueSafe TDS-FBHT001 Flame Proof Bi-Metallic Heat Detector (Probe Type) is a rugged and reliable fixed-temperature heat detection device designed
Close
Edwards CAB21B Backbox for EST4 Panel
The Edwards CAB21D Backbox is a heavy-duty enclosure designed specifically for housing modules within the Edwards EST4 Fire Alarm Panel
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.