Your list is empty, add products to the list to send a request
Previous product
Back to products
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
₹ 19,116.00 GST included
Next product
GST Hand Held Programmer, P-9910B
₹ 13,570.00 GST included
GST Loop Relay Module, P-9903
₹ 15,694.00 GST included
Digital Communication with Fire Alarm Control Panel (FACP) ensures Immunity to
Electromagnetic Interference and Reliable
Operation. Optoisolated Output Signal, resistant to Industrial Frequency Interference. Optocoupler Isolation Technology is used between the Transmitter and Receiver Circuit.
In stock
Description
GST Loop Relay Module, P-9903 is 24VDC Powered. The
Input and Output of Loop Signal are Insulated to ensure Transmission of Detector Signal which Enhances Interference-resistant Ability of the System and prolongs the Loop Distance. P-9903 is Mainly used in Applications where strong Electromagnetic Interference exists or where the Loop needs to be Extended to Longer than 1000m. The relay Module Consists of a Transmitter Circuit, a Receiver Circuit, and an Isolated Power Supply.
Features
- Digital Communication with Fire Alarm Control Panel (FACP) ensures Immunity to Electromagnetic Interference and Reliable Operation
- Optoisolated Output Signal, resistant to Industrial Frequency Interference
- Optocoupler Isolation Technology is used between the Transmitter and Receiver Circuit
Specifications
- Brand : GST
- Operation voltage : 24VDC
- Loop Input Distance : Less or equal to 1000m
- Power Voltage : 24VDC (18VDC to 27VDC)
- Operating Current in Empty Load : Less or equal to 50mA
- Operating Current in Full Load : Less or Equal to 200mA
- Load Ability and Compatibility : Connecting with 1 to 242 loop devices, compatible with all the loop devices
- LED : Red LED lights when FACP sends signals
- Dimension : 85mm×128mm×56mm
Related products
Close
Esser – Smoke Detector (with integrated Sounder) Model no : 802382
The Esser 802382 Smoke Detector with Integrated Sounder is an advanced fire detection device designed to provide early warning and
Close
Edwards – EST4 Audio IO and Telephone Riser Source Module Model no : EST-4-AUDTELS
The Edwards EST-4-AUDTELS Audio I/O and Telephone Riser Source Module is an advanced communication interface designed for the EST4 Emergency
Close
Back box for telephone jack model no 6833-4
The 6833-4 Telephone Jack is a high-quality firefighter telephone receptacle designed for use in fire alarm and emergency communication systems. It
Close
EDWARDS – EST3 to BMS Communications Bridges – Model FSB-PC2 and FSB-PCLW
The EST3 Communication Bridges are ancillary devices that
provide protocol translation between EST3 serial data and the
serial or Ethernet input of an external device controller. Signal
flow is typically one way — from the EST3 network to the building
automation system.
Two communication bridges are available for use with EST3
systems. Each comes complete with the EST3 driver necessary to
communicate over a single supported protocol.
The FSB-PC2 is a multi-protocol bridge that converts the EST3
External Communications Protocol (ECP) to any one of several
supported protocols including Modbus RTU, BACnet MSTP and
Metasys N2. It operates over RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
The FSB-PCLW is a single-protocol bridge that converts the
EST3 External Communications Protocol (ECP) to Lon Works only.
Close
Edwards Weatherproof Strobe Model no : WG4RF
The Edwards WG4RF Weatherproof Strobe is a high-performance visual notification appliance designed for fire alarm and emergency signaling systems in
Close
GST Fire Telephone Jack Socket, P-9911 (J) (MOQ-2Pcs)
Simply insert Mobile Handset into Jack to establish communications with the control centre. Compatible with all GST conventional Fire Telephone handsets in same Zone. Dimension: 85mm x 85mm x 12mm. Can be Installed with Standard Electronic back Box.
Close
Esser – Network Card – Esser by Honeywell Model no : 784841.1
The Esser by Honeywell 784841.1 Network Card is a high-performance communication module designed to interconnect multiple fire alarm control panels
Close
GST ModBus Communication Card for IFP8 panel, P-9935ModBus
Complying with Modbus RTU Communication
Protocol. Standard RS232 interface, used for System Integration of the Third Party. Card Shouldn’t be Inserted and Removed when it is Energized. Default DIP Code is 6.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
