Your list is empty, add products to the list to send a request
Previous product
Back to products
GSTNRP-00 Addressable Fire Alarm Repeater Panel
₹ 38,232.00 GST included
Next product
GSTDB-01 Addressable Common Detector Base
₹ 2,478.00 GST included
GSTDI-9101E Addressable Intelligent Combined Heat Photoelectric Smoke Detector
₹ 2,478.00 GST included
Electrically addressed, can be modified by programmer Strong environmental adaptability due to drift
compensation Self-diagnostic Reed switch test Dirty chamber checking Fire LED allows 360° viewing Possible to switch off polling LED Remote indicator output 2 levels smoke sensitivities, level 1 complies with
EN 54-7 LPCB approved at EN 54-7 and EN 54-5
Description
GSTDI-9101E Intelligent Combined Heat Photoelectric Smoke
Detector integrates photoelectric detection, fixed tempera ture and rate of rise detection technology. The smoke
sensor and heat sensor are integrated in mechanism and
circuitry structure, provide wide range of application, to
detect more types of fire conditions like black smoke with
small particles and alcohol flame. Electrically addressed, can be modified by programmer Strong environmental adaptability due to drift
compensation Self-diagnostic Reed switch test Dirty chamber checking Fire LED allows 360° viewing Possible to switch off polling LED Remote indicator output 2 levels smoke sensitivities, level 1 complies with
EN 54-7 LPCB approved at EN 54-7 and EN 54-5
Features
- Electrically addressed, can be modified by programmer
- Strong environmental adaptability due to drift compensation
- Self-diagnostic
- Reed switch test
- Dirty chamber checking
- Fire LED allows 360° viewing
- Possible to switch off polling LED
- Remote indicator output
- 2 levels smoke sensitivities, level 1 complies with EN 54-7
Specifications
- Operating Voltage : loop 24V (16V ~ 28V)
- Standby Current : ?0.8mA
- Alarm Current : ?1.8mA (without remote indicator) ? 3.8mA (with remote indicator)
- Indicator : Red. Flashes in polling, and illuminates in alarm
- Programming Method : Electronically programming
- Code Range : 1 ~ 242
- Wiring : Non-polarized 2-core for loop. Polarized 2-core for remote indicator.
- Sensitivity Level : 2
- Heat Detector Class : A2R
- Action Temperature : 62 °C
- Environment Temperature : 10°C ~ 50°C
- Relative Humidity : ?95%, non condensing
- Material of Enclosure : ABS
- Ingress Protection Rating : IP2X
- Dimensions : Diameter: 100mm Height: 54.5mm (with base)
- Mounting Hole Distance : 45mm ~ 75mm
- Weight : About 110g
Related products
Close
Solo 110-001 Fiberglass 4 Section Telescopic Pole 1.75m
Solo 101 Telescopic Pole 1.5m which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Close
RE317DHL Heat Detector-ravel Make
Heat Detector-ravel Make Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Agni Hunt – Optical Smoke Detector White – Model : PASD 24
Agni Hunt AHSD-650 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Solo 250ml (A10) Smoke Detector Tester Can
Solo 250ml (A10) Smoke Detector Tester Can Approved all over the world, our Solo smoke aerosols (used with the Solo 330/332 dispensers) deliver smoke particles to the detector under test replicating the conditions of smoke from a fire. Our range of smoke aerosols has recently increased to allow continued use of our Solo 330/332 dispensers in full compliance with latest regulations.ÿ
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
Solo (200-001) Universal Detector Removal Tool (HSN 82055990)
Solo (200-001) Universal Detector Removal Tool With the ability to create various size combinations, the universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.