Your list is empty, add products to the list to send a request
Previous product
Back to products
Heinrich HPA1240 (240W Class-AB Power Amplifier)
₹ 34,692.00 GST included
Next product
Heinrich HPA2240 (Dual Channel 240W Class-AB Amplifier)
₹ 64,192.00 GST included
Heinrich HPA1480 (480W Class-AB Power Amplifier)
₹ 40,592.00 GST included
Rack mount PA 100 Volt Amplifier in 2U Type.
Rated Power of 480W. 70V, 100V and 4-16-ohm Speaker Outputs. Isolated Transformer for Human Safety Operation. Balanced XLR-type line input and Unbalanced Phone jack line input. Balanced XLR-type line output feeds to another power Amplifier. Reliable Protection of over Heat, Overload, Clip & Short Circuit. Indications for Power, Signal, Clip, Protection and Temperature.
In stock
Description
Heinrich HPA1480 (480W Class-AB Power Amplifier) is Designed to work with a 100V line, Especially for Sound Systems Installed in Office Blocks, Shopping Centers, Supermarkets, Bars, Public buildings, Airports, Metro/Railways, Auditoriums, Institutes, etc. The main advantage of a 100V system is the reduced thickness of the Speaker Cables as compared to law voltage allows a much lower current flow for the same power. Another advantage of the high output voltage is the amplifier’s ability to cope more easily with voltage drops when using long speaker cables. In the HPA series amplifiers, the output stage is powered by a low voltage that allows operation with both mains voltage and 240VDC or (24VDC) voltage switching is automatic and completely noiseless.
Features
- Rack mount PA 100 Volt Amplifier in 2U Type
- Rated Power of 480W
- 70V, 100V and 4-16-ohm Speaker Outputs
- Isolated Transformer for Human Safety Operation
- Balanced XLR-type line input and Unbalanced Phone jack line input
- Balanced XLR-type line output feeds to another power Amplifier
- Reliable Protection of over Heat, Overload, Clip & Short Circuit
- Indications for Power, Signal, Clip, Protection and Temperature
Specifications
- Brand : Heinrich
- Power Output : 480W
- S/N Ratio : 80dB (ref 100V)
- Power Bandwidth (plus or minus 3dB) : 40Hz to 15khz at half
- THD : Better than 0.5
- Sensitivity : 1V
- Impedance : 10kohm
- Size (WxHxD) : 482 x 420 x 44 mm
- Shipping Dimensions (W x H x D) : 560mm x 510mm x 90mm
- Net Weight : 18kg
- Shippig Weight : 22kg
Related products
Exide EP1212 Powersafe Plus Lead Acid Battery
Exide EP1212 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Close
Vision CP1223 Sealed Lead Acid Batteries
Vision CP1223 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Agni Hunt 22 Zone Fire Alarm Panel
Agni 22 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Vision CP645 Sealed Lead Acid Batteries
Vision CP645 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Vision CP1212 Sealed Lead Acid Batteries
Vision CP1212 Sealed Lead Acid Batteries is a high quality sealed lead acid rechargeable battery that is engineered to provide superior performance and long service life.
Close
Exide EP65-12 Powersafe Plus Lead Acid Battery
Exide EP65-12 Powersafe Plus Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Solo C3 Gas Detector Spray Used With Solo 330/332 Dispensers
Many multi-sensor fire detectors detect carbon monoxide (CO) as well as smoke and/or heat. Under international codes and standards, the CO cell needs to be functionally tested with a CO stimulus from the protected area through the detector vents to the sensor.
Exide EP12V 7AH Seal Lead Acid Battery
Exide EP1234W Seal Lead Acid Battery manufactured by Exide Powersafe Plus Ep 9-12 Ep 1234W 12V 9Ah Battery. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized.
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
