Your list is empty, add products to the list to send a request
Previous product
Back to products
RE-717M Ravel Addressable Manual Call Point
₹ 3,068.00 GST included
Next product
Testifire 1001-001 Smoke and Heat Detector Test Kit
₹ 218,300.00 GST included
- The minimum required quantity for Ravel RE 316S-2L Conventional Photoelectric Smoke Detector With Base (MOQ-3Pcs) (FSIN00000031) is 3.
Description
Model ALN-E(HFP) is a Photoelectric Smoke Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol.
The ALN-E(HFP) incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use Ionisation Sensors in the majority of applications. This also allows the sensor threshold level to be increased, thereby improving the signal to noise ratio and reducing susceptibility to false alarms.
The ALN-E(HFP) smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber while keeping out ambient light.
Features
- Removable, High Performance chamber
- Twin LEDs allow 360 viewing – green when polling, turn red in fire
- Locking mechanism (sensor to base)
- Variable sensitivity
- Electronically addressed
- Pulsing/non-pulsing controlled from panel*
- Approved by LPCB & VdS
- SIL Level 2 approved variants available
Specifications
- Ordering Code ALN-E(HFP
- Operating Voltage 17 – 41 V d.c.
- Low Power Mode (typ) 120 A
- Quiescent Current (typ) 400 A
- Alarm Current (controlled by CIE) 9.1 mA (excluding remote indicator
- Transmission Method Digital Communications Using ESP
- Operating Temperature Range -10 °C to + 50 °C
- Operating Humidity 95% RH - Non Condensing (at 40 °C)
- Storage Temperature Range -30 °C to +60 °C
- Storage Humidity <80% RH at 60 °C
- Colour / Case Material White / ABS
- Weight (g) 95
- Diameter (mm) / Height (mm) 100 / 45
- Compatible Bases YBN-R/3, YBO-R/SCI, YBO-BS, YBO-BSB, YBNR/3(SCI
- Base Fixing Centres (mm) 48 ~ 74
- Approvals LPCB & VdS
Related products
Close
Freeze Fire Smoke Detector
Freeze Fire Smoke Detector fire alarm Heat Detectors are most suitable for environments where rapid fire development can be expected. when selecting the location on the ceiling for the heat detector, do not locate in direct path of hot or cold air flow. Refer to the detector specifications for the recommended maximum spacing. Earlier detector response may be obtained by reducing the spacing between detectors.
Agni Hunt – Optical Smoke Detector White – Model : PASD 24
Agni Hunt AHSD-650 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Ravel Conventional Smoke Detector
Ravel Conventional Smoke Detector fire alarm Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
ASES Photoelectric Smoke Detector with base, duel LED Model No. AS-601-SD – (MOQ – 4 Pcs)
Power supply polarty free input. Infrared photoelectric sensor. Dustproof, mothproof, anti-light interference design. Stainless steel shield in chamber, anti-RF1 20V/m--1GFIz. MCU processing, eliminate false alarm. Network relay output I LED indicating alarm. SMT manufacture technology, high stability.
Close
On Spotfire Smoke Detector
On Spotfire Smoke Detector fire alarm Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Safe On Conventional Smoke Detector
Safe On Conventional Smoke Detector fire alarm Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Edwards SD-T18 SuperDuct Signature Duct Smoke Detector(18-inch Sampling Tube)
Edwards SuperDuct Signature Duct Smoke Detector detects the presence of smoke under extended temperature ranges in a building’s HVAC system.
Close
Edward SIGA-OSD-FCN + SIGA-SB Intelligent Photoelectric Smoke Detector with Standard Base
Edward SIGA-OSD + SIGA-SB Addressable Smoke Detector with Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.