Your list is empty, add products to the list to send a request
Previous product
Back to products
Qutak QT 360-2L Optical Smoke Detector Dual LED
₹ 2,006.00 GST included
Next product
Qutak QT 990SA Stand Alone Smoke Detector With Inbuilt Buzzer
₹ 2,230.20 GST included
Qutak QT 180-2L Heat Detector Dual LED
See all products from qutak-security-devices₹ 2,360.00 GST included
Heat detectors are vital devices for detecting fires and ensuring safety. As the name suggests, the devices sense the temperature of a room or area in order to detect fires. Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.
In stock
Description
The Heat Detector Dual LED is a addressable temperature detector rated at class A1, A2 and B (depending on the panel configuration settings). A rate-of-rise algorithm allows the device to raise the alarm before the fixed temperature trigger point is reached, whilst an exclusive 7-segment display provides on the spot information such as alarm notification for fault, pre-alarm, maintenance alarm (CleanMe), disable, test, error (double address, wrong sensor type) and sensor polling. Heat detectors are vital devices for detecting fires and ensuring safety. As the name suggests, the devices sense the temperature of a room or area in order to detect fires. Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.
Features
- Rate Of Rise cum Fix Temperature type
- Dual LED for 360 degree visibility
- 2 wire based detector
- Advance algorithms provides advanced detection discrimination
- Easy installation
- Low maintenance
- High immunity against unwanted alarms
- Stable heat chamber, No adjustment or replacement required
- Low operational voltage
- Designed for fast, easy installation
Specifications
- Operating Voltage : DC (10.8 ~ 30) V
- Frequency : 3-5 Seconds
- Heat Sensitivity : 135ø F/ROR
- Reset Voltage : Less than 1 volt
- Reset time : Less than 1 sec
- Alarm indication : 2 continuous emitting red LEDs
- Weight : 140 gram with base
- Start up current : 100æA
- Alarm current (Max) : 50 mA
- Stand by current : 45æA
- Dimension : Dia 100mm, ht 46mm
Related products
Close
Solo 610-001 Carrying Bag For Detector Test Equipment
The Solo 610-001 is a protective carry bag for use with the No Climb Solo range of fire alarm testing equipment. This product features a large enclosure to store aerosol dispensers, head removal tools, and heat detector testers as well as a side pocket ideal for spare test aerosols.
Close
Detect Fire Smoke Detector
Detect Fire Smoke Detector works by detecting light that is reflected off particles from a light beam inside the sensing chamber. When no particles are present in the sensing chamber, the light from the beam does not strike the light detector, indicating all clear
Solo A5 Smoke Detector Tester Aerosol Spray 250ml
Solo A5 Smoke Detector Test is used to test smoke detectors on whether they are functioning correctly or not. A must have for those who want to ensure they have the best possible emergency exit plan for any smoke related scenario. The A5 replicates smoke quickly through the use of a Dispenser. The formula is fast clearing, non toxic and leaves no harmful residue behind so there is no mess or need to worry.
Close
Agni Hunt AHSD-16 Optical Smoke Detector White
Agni Hunt AHSD-16 Optical Smoke Detector White uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Close
Solo (101-001) 1.13mtr Fiberglass Extension Pole(HSN CODE 90279090)
Solo (101-001) 1.3mtr Fiberglass Extension Pole Expendable Upto An essential part of the Solo detector testing range, the Solo 100 telescopic access pole offer safe access to detectors installed at height. Without the need for ladders, the telescopic access pole ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005.
Close
Solo 372 Adaptor for Testing ASD Test Points
Solo 372 No Climb ASD Adaptor allows easy alignment with a ASD sampling hole to help provide a functional test of the system. This not only leads to a more professional approach to maintenance, but will offer a simpler and cleaner solution which can enable faster testing at a reduced cost.
Close
Agni Hunt AHHD-16 Heat Detector
Agni Hunt AHHD-16 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.