Your list is empty, add products to the list to send a request
Previous product
Back to products
Ravel RE-9020 Conventional Fire Alarm Panel System 20 Zones
₹ 27,612.00 GST included
Next product
Ravel RE-9032 Conventional Fire Alarm Panel System 32 Zones
₹ 42,598.00 GST included
Ravel RE-9024 Conventional Fire Alarm Panel System 24 Zones
See all products from ravel₹ 31,978.00 GST included
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 – 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network.
Description
RE-900 Series, Microprocessor based conventional Fire Alarm Control Panel, are designed to be used for medium and large size commercial complexes and industrial establishments.This panel can accommodate a range of 12 zones upto 128 zones.User friendly systems which involves a touch keypad to program the panel. This can be used as a standalone or networkable panel. Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 – 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network.
Features
- Complies with UL -864 and NEPA -72
- 20 x 4 dot matrix LCD display.
- Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply.
- Standby (battery) backup 24 VDC power supply with built in charger.
- Touch keypad for user friendly operation.
- Epoxy powder coated finish.
- Class- B, Style B / C initiating device circuit (IDC).
- All zones accept smoke detectors and normal open contact devices.
- Class B notification appliance circuits (NAC).
- Main, Standby status with audible and visual indication.
- Error free Fire / Fault status in unambiguous colored LED indication.
- 1000 Event storage with RTC.
- Main, Standby status with audible and visual indication.
- Two Form C relays for fire and fault.
- Resettable / Steady 24VDC. Output.
Specifications
- Electrical Specification: Primary Power: 120 - 220VAC ± 10%, 60 / 50 Hz.450W
- Stand by Power: 24 VDC (2 X 12V Battery (for AH refer battery calculation) Quiescent current : 120 mA
- Operating Condition : Operating Temperature 0 - 49° C/32-120° F Storage Temperature - 0 to 60 ° C Relative Humidity - 93 ± 2% RH (non- condensing) at 32 ±2° C/90 ±3° F.
- Charging Circuit : Charging Voltage 28.0V, ±0.2% Charging Current 1.2A (Max.)
- D.C. Output: (Resettable / Steady) 24VDC Output ,1A Max
- Initiating Device Circuits: All zones are Class B Style B/C operation (Programmable) : Normal Operating Voltage : 14 - 21 VDC Alarm Current : 15-30mA. Short Circuit Current : 45mAMaximum. Loop resistance : 100 ohms Maximum. End-Of-Line Resistor : 4K7, 1/2watt Standby Current : : 7mA(2.5mAfor Detectors)
- Notification Appliance Circuits : Class B Style - Y wiring Operating Nominal Voltage : 24VDC Current from 12 Zone Upto 64Zone NACs: : 2 Amps (1 A per circuit)
- Common Relays : Type : Form C No. of Relays : 2 Rleay Contact Rating : 2Amps @ 30 VDC, 0.5Amps @ 125VAC. Power Factor : 1.0
Related products
Close
Safe On 8 Zone Conventional Fire Alarm Panel With LED Display
Safe On 8 Zone Conventional Fire Alarm Panel With LED Display is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection. RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries.
Close
Agni Hunt 20 Zone Fire Alarm Panel
Agni 20 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire
detection, for small installation which is 2 zone.
Close
Agni Hunt 2 Zone Fire Alarm Panel
Agni 2 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost-effective solution to fire detection, for small installations which are 2 zone.
Close
On Spotfire 6 Zone Fire Alarm Panel
On Spotfire 6 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire detection, for small installation which is 2 zone.
Close
Safe On 16 Zone Conventional Fire Alarm Panel With LED Display
Safe On 16 Zone Conventional Fire Alarm Panel With LED Display is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection. RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries.
Close
Safe On 6 Zone Conventional Fire Alarm Panel With LED Display
Safe On 6 Zone Conventional Fire Alarm Panel With LED Display is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection. RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries.
Close
Safe On 10 Zone Conventional Fire Alarm Panel With LED Display
Safe On 10 Zone Conventional Fire Alarm Panel With LED Display is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection. RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries.
Close
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.