Your list is empty, add products to the list to send a request
Previous product
Back to products
Simplex 4099-9701 Addressable Manual Call Point
₹ 3,186.00 GST included
Next product
Simplex 4100-3103 Isolator Module for MAPNET
₹ 50,173.60 GST included
Simplex 4098-9714 photoelectric Smoke Detector
₹ 3,422.00 GST included
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Description
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Features
- Sealed against rear air flow entry
- Interchangeable mounting
- EMI/RFI shielded electronics
- Photoelectric technology sensing
- 360° smoke entry for optimum response
- Built-in insect screens
- Protocol IDNet, MAPNET II
- Voltage 24 VDC
- Voltage Range 18 – 32 VDC
Specifications
- Brand Simplex
- Unit of Measurement EA (Each)
- Type Detector
- Style Plug-In
- Detectable Medium Smoke
- Detection Method Photoelectric
- Programming Set via Base
Related products
Close
GST Conventional Smoke Detector with Base, JTY GF GST104+DZ-03 (MOQ-3Pcs)
Photoelectric Smoke Fire Detector. Designed for use with Fire Alarm Control Systems. Commonly used in Marine and Commercial Applications.
Close
GST Conventional Multisensor Detector, DC-9101E + DB-01 (MOQ-2Pcs)
Strong Environmental Adaptability due to Drift Compensation. Reed switch testing. Removable innovative sensing chamber, easy for Maintenance. Fire LED allows 360 Deg. viewing. Remote Indicator output available. 2 levels Sensitivities Programmable, fix temperature or rate of rise programmable. 2 levels Smoke Sensitivities Programmable, level 1 complies with EN 54-7. Heat part complies with EN 54-5.
Close
GST Stand Alone Smoke Detector, S-9102R (MOQ-2Pcs)
Self contained Optical Smoke Detector and Alarm Buzzer. Easy installation. Test/ Reset Button. Low Battery indication. Relay Output.
Close
INTELLIGENT ADDRESSABLE OPTICAL SMOKE SENSOR WITH IN BUILT FAULT ISOLATOR C/w Base ULCAP320+UCAB300
Rapid and accurate fire detection in your addressable fire alarm system with the ULCAP320 + UCAB300 Intelligent Addressable Optical Smoke
Close
Dahua Conventional Multi Sensor Detector (Without RI Support), DHI-HY-C135 (MOQ-3Pcs)
3W-B Multi-sensor Smoke and Heat Detector with Two-wire and Polarity-free power supply. Reliable communication: Built-in microprocessor, Stable performance. Ultra-low power consumption: Ultra-low monitoring current and Alarm Current. High-performance sensor Featuring a split-spectrum Optical Smoke Detector and a Sensitive Thermistor. Designed in accordance with EN54-5 and EN54-7 standards.
Close
Dahua Addressable Smoke Detector (RI Support), DHI-HY-2301B (MOQ-2Pcs)
Polarity-free Two-wire Design simplifies on-site wiring. Employing intelligent background light compensation, it auto-adjusts alarm thresholds based on maze contamination, Prolonging cleaning cycles and Facilitating maintenance. Base Terminal features non-loosening screws for effortless Installation. Exhibiting High resistance to acids and rust, the contact material is Durable. Designed in accordance with EN54-7 Standard.
Close
Kidde – Fire Sentry Battery Operated 4” Smoke Detector Model: I9040
The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4)
Close
Honeywell – Photoelectric Smoke Detector – Model: IDP-PHOTO-R-W
The Honeywell IDP-PHOTO-R-W is a highly accurate, addressable photoelectric smoke detector designed to provide early warning of smoldering fires in commercial and industrial environments. Featuring remote test capability, this white, low-profile detector integrates seamlessly with Honeywell’s fire alarm systems using the System Sensor protocol.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.