Your list is empty, add products to the list to send a request
Previous product
Back to products
NVR Kinetic Air Valve, Body - C.I, Ball - Timber Rubber Coated, 50-100mm
Price range: ₹ 8,457.06 through ₹ 15,930.00 GST included
Next product
AUTRONICA BSR-100 Autronica BSR-100 Main Board
₹ 146,556.00 GST included
System Sensor – Ceilling Speaker – Model : SPSCWLED
See all products from system-sensor₹ 12,361.68 GST included
Flexible design options meet virtually any application requirement:
wall or ceiling mount, red or white color choices, bezel kits for
alternate markings and languages, and LED color lenses for
distinctive visual signaling. In addition, installers can easily adapt
devices using field selectable candela, using rotary switches.
Description
The System Sensor L-Series and L-Series with LED
platform offers the most versatile and easy-to-use line of speakers
and speaker strobes in the industry with lower current draw and
modern aesthetics. LED lighting technology offers significantly lower
current draw compared to older Xenon bulbs across a full candela
range. This improves design flexibility for notification appliance
circuits (NACs) while also reducing power supply requirements
allowing for simpler and lower cost installations.
Features
- LED technology provides lower current draw
- Digital Volt Meter (DVM) diagnostic test points for Speaker Strobes
- Common aesthetics across the L-Series platform
- Tamper-resistant construction
- Field-selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185
- Field-selectable candela settings on ceiling units: 15, 30, 75, 95, 115, 150, and 177
- Rotary switches for candela, speaker voltage (25 and 70.7 Vrms) and power settings (¼, ½, 1, and 2 watts)
- Mounting plate provides plug-in design for easier installation and shorting springs to check wiring continuity
- Electrically compatible with legacy SpectrAlert, SpectrAlert Advance and L-series devices at 16-33 VDC
Specifications
- Standard Operating Temperature 32°F to 120°F (0°C to 49°C)
- Humidity Range 10 to 93% non-condensing
- Strobe Flash Rate 1 Flash Per Second
- Nominal Voltage, Strobe Regulated 24 VDC
- Operating Voltage Range, Strobe 16 to 33 VDC
Related products
Close
ASES Hooter, 100 db output, 24 VDC operated, ABS housing Model No. HABS2
24 DC Operation. Compatibility with any make conventional fire alarm system. Wall mount facility. Connector is plug in type. Suitable for malls, resturant, residential etc. Whealing tones available.
Close
Kheraj Horizontal Double Mounting Siren, DS-325
Electrically Operated Sirens. Effective Announcer. Horizontal. Double Phase 220/250 V.
Close
Ultra Fire Hooter ABS
The hooters are notification-producing devices that give out alarm sounds when the detectors detect any hazardous situation like a fire.
Close
Detect Fire Hooter-ABS
Detect Fire Hooter-ABS The hooter is a kind of electronic device which gives an audio output and has a visual indication and has a built-in accept facility, thereby saving on the cost of a contactor or relay
Close
Kheraj Horizontal/ Vertical Single Mounting Siren, Single Phase, SS-100
Electrically Operated Sirens. Effective Announcer. Horizontal OR Vertical. Single Mounting Siren. Single Phase 220/250 V.
Close
Ravel RE-658SS, Addressable loop powered 2Wire Sounder Strobe, Wall mount
The addressable sounder-strobe, strobe & sounder is designed to be connected Fire Alarm
Systems and these should be connected to the compatible control panel. The wall mount
series are designed for indoor applications and provide audio and visual warning.
The Addressable loop powered Sounder, sounder-strobe & Strobe receives their power from
SLC, and it is controlled via addressable communication.
Close
TNA Addressable Sounder Strobe
EN54-3:2001+A1:2002 + A2:2006 Compliance. Built-in MCU processor and digital addressing. 17 tones Programmable sound output. Programmable types such as Sounder-Strobe, Sounder or Strobe alone. Programmable Evacuate or Pre-alarm/Evacuate signal. Low and normal consumption mode. One or Two addresses mode. 10 Highlights LED status cluster. Onsite Adjustable Parameters. Loop or external power input. Aesthetically pleasing design. Universal mounting with fix base for simple installation.
Close
Flame Pro Hooter
Flame Pro Hooter is a kind of electronic device which gives an audio output and has a visual indication and has a built-in accept facility, thereby saving on the cost of a contactor or relay
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.