Your list is empty, add products to the list to send a request
Previous product
Back to products
TNA Intelligent Addressable Optical Smoke Heat Detector
₹ 1,711.00 GST included
Next product
TNA Intelligent Dual Heat Detector
₹ 1,534.00 GST included
TNA Intelligent Addressable Optical Smoke Detector
₹ 1,652.00 GST included
EN54-7:2000 PlusA1:2002 PlusA2:2006 Compliance. LPCB Approved. Using microprocessor technology with memory capacity up to 10 events. Analogue sending and digital addressing Provide real time algorithm to the control panel Smart linear drift compensation. Onsite adjustable parameter 360-degree visual indicator. Removable chamber against dust and small insect Ancillary remote indicator output. Aesthetically pleasing design.
In stock
Description
TNA Intelligent Addressable Optical Smoke Detector-TX7100 is the ideal device for most applications, due to its spiffing linear response to a wide variety of different types of smoke patterns. Secure and speedy communication through the on-board processor enables the detector to make its own decision, resulting in greater automation. In the event of fire, the integral microprocessor analyses the signal according to factors such as signal strength and rate of increase, then confirms these patterns with the pre- programmed fire scenarios and smoke patterns, for a faster and safer response. Once it is confirmed, the LED indicates the sensor status and parallel sending communication signal to the control panel. The TX7100 detector is compatible to the TX7004 analogue intelligent fire alarm control panel, produced by single manufacture T&A, to avoid addressable communication compatibility problem.
Features
- EN54-7:2000 PlusA1:2002 PlusA2:2006 Compliance
- LPCB Approved
- Using microprocessor technology with memory capacity up to 10 events
- Analogue sending and digital addressing Provide real time algorithm to the control panel Smart linear drift compensation
- Onsite adjustable parameter 360-degree visual indicator
- Removable chamber against dust and small insect Ancillary remote indicator output
- Aesthetically pleasing design.
Specifications
- Brand : TNA
- Input Voltage : 24VDC [16V to 28V]
- Current Consumption : Standby 0.6mA, Alarm: 4mA
- Protocol/Addressing : T&A, Value range from 1 to 254
- Sensitivity : As per stipulated standard
- Indicator : Single LED / 360-degree Visual
- Material / Colour : ABS / White Glossy finishing
- Dimension / Heigh : Diameter 99.7 mm / 57 mm
- Weight : 145g (with Base), 90g (without Base)
- Operating Temperature : Minus10degreeC to Plus 50degree C
Related products
Close
Agni Hunt AHHD-16 Heat Detector
Agni Hunt AHHD-16 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Solo 110-001 Fiberglass 4 Section Telescopic Pole 1.75m
Solo 101 Telescopic Pole 1.5m which is extremely lightweight, quick and easy to extend to any height. Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials. Equipment in contact with live electrical components make it vital for the insulating materials to be of the highest quality. The Solo 100/101/108 will stand up to the rigors of everyday field-testing and isolate the user from danger.
Close
Agni Hunt AHHD-12 Heat Detector
Agni Hunt AHHD-12 Heat Detector fire alarm Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Solo (424-101) Solo Heat Detector Tester
Solo (424-101) Solo Heat Detector Tester Codes and standards require functional tests to
introduce (simulated) smoke through the detector
vents and into the sensing chamber. The Solo 330
dispenser is the most popular device for achieving
this, benefiting as it does, from a cup big enough
for the great majority of detectors but still small
enough not to be obstructive and unwieldy.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
RE317DHL Heat Detector-ravel Make
Heat Detector-ravel Make Heat Detectors Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blend with most ceiling styles to provide an inconspicuous unit.
Close
Agni Hunt Standalone Smoke Detector
Agni Hunt Standalone Smoke Detector uses light-sensing technology to detect a fire. The external detector molding has an indicator LED which is white in a quiescent state but produces a red light in alarm.
Reviews
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
Reviews
There are no reviews yet.